Mailing List Archive Mailing List Archive
After George's followup to this thread on cavers, I tried his approach for the right post -- it's cleaner than what I was doing. So, now my right-post Mk20 is tilted to the left (not quite horizontal), long hose goes down behind the wings from one of the side LP ports, BC inflator is also on a side LP port (two ports away from the long hose). This is also consistent with what JerkyDiver@ao*.co* posted, I believe. Nice improvement... Thanks! - Todd > From: Todd Leonard <toddl@in*.co*> > Date: Tue, 5 Nov 1996 15:49:10 -0500 (EST) > To: Kent.Lind@no*.go* > Subject: Re: Hogarthian setup and ScubaPro regs > Cc: techdiver@terra.net > > [...] > > Left post: Mk20 is tilted to the right, not quite to horizontal. The > short hose goes off to the right, and the HP hose goes almost straight > down (to be clipped off on the hip D-ring). The key is to use the LP > port on the end of the swivel -- I was warned not to do this when I > bought the regulator (the owner said it wasn't a port!), but JJ set me > straight on that point. > > Right post: Mk20 is tilted slightly to the right, but almost vertical. > Long hose is in the LP port on the end of the swivel, and runs straight > down behind the wings to the light canister, and you know the rest. BC > inflator hose comes out of one of the remaining LP ports, over the top > of the wings, then along the corrugated hose (retained by inner-tube). > > [...]
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]