Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: <gmiiii@in*.co*>
Date: Mon, 30 Sep 1996 04:12:48 -0700
Subject: Re: Suit inflation
To: Rod Nairne <troppo@te*.co*.au*>
Cc: cavers@ge*.co*, techdiver@terra.net
Sounds great , won't work for our style - we need to control both the bc and
the 
suit with one hand at the same time. If the reg fails, we control the suit with 
the valve. We use the standard fittings only on our suits - everything must be 
interchangeable. If the gas is lost we transfuse from each other. Trust me, 
chief, I have thought all of this through very carefully. The only missing link 
lately, until OMS made a dedicated regulator, was finding a replacement for the 
Poseiden that would not flow too fast. 

  The real beauty of diving with us is that the show always goes on, since we 
have no tomfoolery going on with gear, and we always have one response to each 
situation, an advantage that you only learn by spending most of your diving
time 
at ten atmospheres - you learn about the "quick and the dead". 

 I did not realize that the "troppo" was your address - I deleted all of the 
other messages that did not have your name. Did I miss anything good?

On Mon, 30 Sep 96, Rod Nairne <troppo@te*.co*.au*> wrote:
>George,
>
>Jason has a good setup for suit inflation; it is a direct feed 
>with no reducer. The valve is one designed for BC inflation, so 
>has a gradual increase in flow rate built in. The beauty of 
>this may be you can open it and leave it open as you descend, 
>it has no high pressure seat to fail, no hoses, so is definatly 
>a superior setup. It is similar to the inflation system on the 
>FENZY horse collar BC's, but uses UK built valves and suit 
>connector.
>
>The connection on the suit can be placed on the side of the 
>leg, out of the flow, is available in yoke or din, and has a 
>one way valve built in if you remove the cylinder U/W. 
>
>Unfortunately, you must suggest the change to the director, who 
>won't present it to the engineer, who won't approve it. ;)
>
>Rod Nairne.
>
>
>
>
>

George M. Irvine III
DIR WKPP
1400 SE 11 ST Ft Lauderdale, FL 33316
954-493-6655 FAX 6698
Email gmiiii@in*.co*

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]