Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Date: Mon, 11 Mar 2002 15:37:16 -0700
To: deco@de*.or*, techdiver@aquanaut.com
From: "Bruce R. Wienke" <brw@la*.go*>
Subject: FYI: RGBM WKPP/Irvine Test Deco Profile Comparison
>Date: Mon, 11 Mar 2002 15:18:40 -0700
>To: "Chris Elmore" <elmorec@at*.ne*>
>From: "Bruce R. Wienke" <brw@la*.go*>
>Subject: Final RGBM WKPP test deco profile
>Cc: brwswe@ao*.co*
>Bcc:
>X-Attachments:
>
>
>
>
>  Chris,
>
>     Check this one out -- aggressive RGBM.  You got this
>  on AOL too --  filters will not admit your email there.
   George's profile is appended too.

       Nice match -- that 270 - 100 fsw deco range is wild.

>  BW
>
>
>   --Dive Sequence Number--   1
>
>   --Scaling/Control Flags--
>
>   print flag =  0   repet flag =  0
>   dive number =  1  altitude =      0.0 ft
>   rfac = 1.94   pfac = 1.00   bfac = 1.05
>   unsat =  1
>   surface consumption rate =  0.75 cubic ft/min
>
>
>   --RGBM/Mixed Gas Parameters--
>
>   nitrogen tissues =   5.0  10.0  20.0  40.0  80.0 120.0
>                            160.0 240.0 320.0 400.0 480.0 min
>   helium tissues =     1.7   3.3   6.7  13.3  26.7  40.0
>                             53.3  80.0 106.7 133.3 160.0 min
>
>
>   --Dive Profile--
>
>   time since last dive =    24000. min
>   time of last dive =      0.0 min
>   surface breathed nitrogen = 0.79   helium = 0.00   down switches =  2
>
>    switch 1 depth =    0.0 fsw helium = 0.00 nitrogen = 0.79
>               speed =   42.8 fsw/min   way time =    0.0 min
>    switch 2 depth =  300.0 fsw helium = 0.70 nitrogen = 0.18
>               speed =   42.8 fsw/min   way time =   30.0 min
>
>   trimix = 0.70 helium  0.18 nitrogen  up switches =  3
>
>    switch 3 depth =  120.0 fsw helium = 0.00 nitrogen = 0.65
>               speed =  -25.0 fsw/min   way time =    0.0 min
>    switch 4 depth =   70.0 fsw helium = 0.00 nitrogen = 0.50
>               speed =  -25.0 fsw/min   way time =    0.0 min
>    switch 5 depth =   20.0 fsw helium = 0.00 nitrogen = 0.00
>               speed =  -25.0 fsw/min   way time =   34.0 min
>
>
>   --EOS--

            rex = 8.192 microns  d/rfacs =  1.087  1.000
>           T = 80 F   aa = ****  bb= ****  cc = ****  dd = ****
>           tau = ****    Hugoniot = 6   transfer coeff = ****
>
>   --Decompression Schedule--
>
>
>   bottom depth =  300.0 fsw  ppO2 =  1.2 atm   OTU/CNS =   40.2 min/0.15 %
>   bottom time =     37.0 min
>
>     depth     wait   tissue    tension   pss      ppO2      OTU    CNS
>gas
>     (fsw)     (min)   (min)     (fsw)   (fsw)     (atm)    (min)   (%)
>(ft^3)
>
>     300.0 -   30.0                            -    1.2 -   40.2 - 0.15 -
>256.
>     280.0 -    0.0 -    0.5 -  270.4 -   22.5 -    1.1 -    0.0 - 0.00 -
>-2.
>     270.0 -    1.0 -    2.3 -  254.3 -   26.6 -    1.1 -    1.2 - 0.00 -
>5.
>     260.0 -    0.0 -    2.3 -  256.4 -   26.6 -    1.1 -    0.0 - 0.00 -
>-2.
>     250.0 -    1.0 -    4.7 -  249.0 -   28.8 -    1.0 -    1.0 - 0.00 -
>5.
>     240.0 -    0.0 -    2.3 -  252.8 -   26.6 -    1.0 -    0.0 - 0.00 -
>-1.
>     230.0 -    1.0 -    4.7 -  238.9 -   28.8 -    1.0 -    0.9 - 0.00 -
>5.
>     220.0 -    1.0 -    4.7 -  226.8 -   28.8 -    0.9 -    0.9 - 0.00 -
>4.
>     210.0 -    1.0 -    9.4 -  220.9 -   30.1 -    0.9 -    0.8 - 0.00 -
>4.
>     200.0 -    1.0 -    9.4 -  214.1 -   30.1 -    0.8 -    0.7 - 0.00 -
>4.
>     190.0 -    1.0 -    9.4 -  207.2 -   30.1 -    0.8 -    0.7 - 0.00 -
>4.
>     180.0 -    2.0 -    9.4 -  192.6 -   30.1 -    0.8 -    1.2 - 0.00 -
>9.
>     170.0 -    1.0 -    9.4 -  186.5 -   30.1 -    0.7 -    0.5 - 0.00 -
>4.
>     160.0 -    1.0 -    9.4 -  180.0 -   30.1 -    0.7 -    0.5 - 0.00 -
>3.
>     150.0 -    3.0 -   18.8 -  167.9 -   31.5 -    0.7 -    1.2 - 0.00 -
>12.
>     140.0 -    2.0 -   18.8 -  160.6 -   31.5 -    0.6 -    0.7 - 0.00 -
>7.
>     130.0 -    3.0 -   18.8 -  149.5 -   31.5 -    0.6 -    0.7 - 0.00 -
>13.
>     120.0 -    1.0 -   18.8 -  137.4 -   31.5 -    1.6 -    2.0 - 0.02 -
>5.
>     110.0 -    1.0 -   18.8 -  129.9 -   31.5 -    1.5 -    1.8 - 0.01 -
>5.
>     100.0 -    3.0 -   37.6 -  120.8 -   32.5 -    1.4 -    4.9 - 0.03 -
>10.
>      90.0 -    4.0 -   37.6 -  110.4 -   32.5 -    1.3 -    5.9 - 0.03 -
>12.
>      80.0 -    4.0 -   37.6 -  100.9 -   32.5 -    1.2 -    5.3 - 0.02 -
>11.
>      70.0 -    4.0 -   37.6 -   91.8 -   32.5 -    1.6 -    7.5 - 0.05 -
>10.
>      60.0 -    6.0 -   56.4 -   81.8 -   32.9 -    1.4 -    9.9 - 0.05 -
>13.
>      50.0 -    8.0 -   56.4 -   72.1 -   32.9 -    1.3 -   11.3 - 0.05 -
>16.
>      40.0 -    9.0 -   56.4 -   62.6 -   32.9 -    1.1 -   10.6 - 0.03 -
>16.
>      30.0 -   14.0 -   75.2 -   53.0 -   33.0 -    1.0 -   12.9 - 0.04 -
>21.
>      20.0 -   34.0 -  112.7 -   35.3 -   33.2 -    1.6 -   65.7 - 0.52 -
>41.
>      10.0 -    6.0 -  112.7 -   32.9 -   33.2 -    1.3 -    8.9 - 0.04 -
>6.
>
>              159.0                                        197.8   1.08
>496.
>
>
>
>   deco plus surfacing time =    122.0 min
>   cum CNS% = 1.08  cum OTU =    197.8 min
>   cum gas consumption =  496. cubic ft
>
>   dive time =    159.0 min
>
>
>
>   total dives processed =   1
>
>>
>>----- Original Message -----
>>>From: "Bruce R. Wienke" <brw@la*.go*>
>>>To: "Chris Elmore" <elmorec@at*.ne*>
>>>Sent: Sunday, March 10, 2002 3:11 PM
>>>Subject: Re: Test deco profiles
>>>
>>>
>>>> Chris,
>>>>
>>>>     Send me George's (your) test profile -- you ahve a very conservative
>>>>  RGBM calc.  Are you interested in a more "ambitious" one?
>>>>
>>>>  BW
>>>
>>>Bruce,
>>> G's profile is below. Yes, I'm looking for something on the cusp of what is
>>>theoretically possible- not something that I would actually want to try.
>>>That's why I have the decopalnner in as the touchstone for comparison.
>>>Thanks,
>>>C.
>>>
>>>****************
>>>Get to the bottom in 7 minutes, leave 30 minutes later.
>>>
>>>300                     30   12/70
>>>
>>>300-240                3 minutes
>>>
>>>240-190                5 minutes
>>>
>>>180-130                7 minutes
>>>
>>>120     switch to 35%
>>>120        5 minutes
>>>110        4
>>>100                  4
>>> 90        3
>>> 80        2
>>>
>>>70 switch to 50%
>>>70        5
>>>60        5
>>>50        5
>>>40        8
>>>30        12
>>>
>>>20 switch to 100%
>>>20        34
>>>20-0        10
>>
>>
>>
>
>


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]