Bruce, you have crossed the line here, you lose. "Substance abuse" is not
something you will be able to throw at me when I don't even drink, and have
not since I was 33 years old. You are an asshole, a nobody from nowhere, a
nothing, and all you want to do it take a swing at me.

You do not know shit about scooters. I offer it with nylon or PVC. The
tradeoff? Nylon gets eaten if a battery leaks, and will not harden back up.
PVC takes it all, but it is more fragile if shocked. I use both. Nylon
absorbs water and swells, so I have to cut those lids smaller, and sooner or
later they need to be trimmed or the body shaved out a little. I can make
any scooter out of anything any time. I back mine up, I fix what breaks, and
nobody has ever had a problem with that. I back up the motors, which is the
biggest problem due to the special windings. If they are off, I replace
them. Your nickel rocket buddy can't do that.

Take your pick.

You also don't know shit about me or Reinhard, and you don't know our
relationship. You don't know shit about cave diving with a rebreather, and
the fact is that nobody ever seems to outgun us with CCR's because of the
sensor and other bullshit problems. We have no sensors, no monitors, no
nothing, we just dive and if we can breathe, and if the machine is adding
gas, we are ok. You think you know something, but you do not. Knowing would
be evident in your comments, rather than the not knowing that is evident by
the fact that you have never done jack shit, and never will.

You do what I do, and you can talk about it. Skip the bullshit and the
personal crap.


-----Original Message-----
From: Bruce Stewart [mailto:bruces@sh*.ne*.au*]
Sent: Saturday, September 01, 2001 7:03 PM
To: Trey; givemeabreak george; techdiver@aquanaut.com
Subject: Re: George has done it again!


Moron,

> First of all, moron, who had built some 200 of them that are still in
> service an still covered under warranty and still are setting all the
> records?

You, good and no big numbers here to draw any engineering data from.
Further to this you never reveal any data on the units sent back for repair
so
anything you cite is worthless. It is widely known you cover up.

>What makes you think we don't know what we are doing when nobody
> else seems to be able to get there?

No no Irvine others have passed you "big time" on the scooter front
that is why Silent is doing so well, get it?


> Mine are PVC for several good reasons, none of which you need to know.
>They are otherwise the way they are for good reasons you do not need to
know.

PVC is ideal as are other materials for this application, no brainer here,
its is not in the scope of this forum to discuss materials technology other
than
PVC is OK.

> Anyone who does need to know has one or will talk to somebody who does and
get one.

Yes indeed, the next generation called Silent Submersion.

>However, asshole, you might want to ask when the last time "sewer
> pipe" came apart in a building or house?

Having been in the building game for 20 years I've seen PVC used in all
sorts of
applications, its great in houses "when done right" I've also seem my fair
share
of disasters too so your argument is false again.

>The bond is chemical, not "glue",
> and in some cases it is welded and bonded.

Congratulations you have learnt something!

>
> The ss is still a total kluge. The inside compartment motor compartment is
> the stupidest thing I have ever seen and it will not hold its integrity.

Cite your reasons for the above? I strongly suspect you won't because again
you can't.


> They have tried all kinds of fixes but it will not work the way they do
it.

Wrong again.

> That is all I will say about that part, I don't want them figuring it out.

This is so funny! after all your substance abuse you really are getting
paranoid
in old age! lol


> The wiring is a disgrace. It is cheap crap kluged together with bullshit
> connectors in every position.
>
> The motorcycle handle thing is the dumbest invention yet, and is worthless
,
> causes all kinds of problems.

Like?

>
> The hdpe is too soft. It needs to be really thick ( they have the bodies
an
> inch thick ) and it still flexes all over the place. Screws pull right out
> of it.

Yeah like the EE lights and there a piece of crap arn't they!


> All of these different plastics have their advantages and drawbacks,
> and I actually could make one with certain parts HDPE, and do it right,
but
> there is no need.

Too funny the "only I can do it right comes up again"

> Most people are fooled by the end taper on that thing,
> whereas the problem with that is that this leaves the motor too close to
the
> body, and the fact is at the speeds we run, there is no need for any
> tapering.

You have really lost it here, clutching for straws are we?


> There are other ratios that determine drag in these designs, and
> again, I will not discuss them.

No Irvine you never do because you are way out of your depth
and pull the shroud "I will not discuss it" don't you ever think we
have all seen thru you years ago?

>
> Now, whose scooters hold the European and World cave distance record,

Reinhard built Gavin scooters, not yours, very good copies with slight
modifications
to over come your inadeqaucies, even Nylon nose cones not PVC to
avoid the cracking problems etc! your not going to pull more deceit on us
this time. Simply the scooters used were not yours due to a number of
problems cited, one cited.



> scooters are in the hands of the most number of dive teams who really do
> anything, whose scooters have been backed fully for nine years, whose
> scooters are the best performing,

Time will change this very quickly.


>whose scooters are designed by real
> engineers and people who really know this stuff

Silent Submersion.


>
> By the way, why is it that you weenies can not use your real name when
> lying? Are you that scared of me, or are you just another resentful little
> liar?

No Irvine you are the resentfull little liar.
>

Real name, real address, real number!

Bruce Stewart
32 Bunberra Street
Bomaderry
New South Wales
Australia, 2541

(612) 44225510


PS tell us about Oxygen sensors "loading up again"   tooo funny lmao too
funnny BWBWHAHAHAHAHAH..................... DICKHEAD.

> -----Original Message-----
> From: givemeabreak george [mailto:georgegivemeabreak@ho*.co*]
> Sent: Friday, August 31, 2001 3:53 PM
> To: techdiver@aquanaut.com
> Subject: George has done it again!
>
>


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]