Hey, Johnny I don't know what kind of diving you are doing "down under" but
the kind of diving we do up here, if you get to the point that you have to
take your rig off during the dive, you are pretty much fucked, screwed,
blued and tattooed, weightbelt or no.

Is it just me or does this not seem rather obvious to the rest of the list?

Please refrain from further posts until you know what the fuck you are
talking about.

   Jim
 -------------------------------------------------------------------
 Learn About Trimix at http://www.cisatlantic.com/trimix/

> From: "John McMillan" <mcmillan_knit@on*.ne*.au*>
> Reply-To: "John McMillan" <mcmillan_knit@on*.ne*.au*>
> Date: Fri, 16 Jun 2000 21:30:13 +1000
> To: "Techdiver Mailing List" <techdiver@aquanaut.com>
> Subject: Re: Weights
> 
> I read a lot of crap in the many posts that have been presented over the
> last few days regarding weighting. Most of the suggestions have been down
> right bloody dangerous, stupid, and idiotic. Hey guys what happened to
> keeping it simple. We should weight ourselves with out tanks harness etc
> attached, just negative. if we are still negative with the tanks and harness
> etc on then we are correctly weighted. Using the traditional weight belt is
> the most effective way of doing this. Have a bloody good think about why you
> should be weighted this way before you make any comments. The guys that want
> to wear tank weights etc all over the place have a think about buoyancy
> control if you have to take your gear off in water at depth. If and when the
> shit hits the fan and you have to do this with weights all over your gear
> "good luck".
> 
> Hoo Roo
> Johnny Mack
> Down Under
> 
> 
> ----- Original Message -----
> From: John Walker <techdive@ea*.ne*>
> To: <techdiver@aquanaut.com>
> Sent: Friday, June 16, 2000 10:11 AM
> Subject: Re: Weights
> 
> 
>> Hell Cobber they give me a sore back.  I'd bet Mike Black (you know,
> the
>> guy that doesn't dive) would consider this a Type 2 DCS hit.
>> 
>> Dr. John Walker
>> 
>> 
>> 
>> ----- Original Message -----
>> From: Jim Cobb <cobber@ma*.ci*.co*>
>> To: Al Marvelli <ajmarve@ba*.ne*>; Paul Braunbehrens
>> <Bakalite@ba*.co*>
>> Cc: <techdiver@aquanaut.com>
>> Sent: Wednesday, June 14, 2000 9:02 AM
>> Subject: Re: Weights
>> 
>> 
>>> Weight belt for wetsuits. Weight belt fucks up the airflow in your
> drysuit
>>> and is a failure point. I hate weight belts.
>>> 
>>> Jim
>>> -------------------------------------------------------------------
>>> Learn About Trimix at http://www.cisatlantic.com/trimix/
>>> 
>>>> From: Al Marvelli <ajmarve@ba*.ne*>
>>>> Date: Tue, 13 Jun 2000 03:24:40 -0400
>>>> To: Paul Braunbehrens <Bakalite@ba*.co*>
>>>> Cc: techdiver@aquanaut.com
>>>> Subject: Re: Weights
>>>> 
>>>> I dont mean to flame Paul personally but I have to ask some simple
>> questions
>>>> here.
>>>> 
>>>> Why is the weight belt not ideal? its cheap, easy to learn, and found
>>>> everywhere.
>>>> 
>>>> The belt gives you a built in failure indicator< if you are paying
>> attnetion
>>>> you can feel it slip, and thats easy to correct on your own> and if
> its
>>>> under you crotch stap has a built in anti ditch safety.
>>>> 
>>>> and also
>>>> 
>>>> what is the facination with non ditchable weight?
>>>> 
>>>> especially on a rig that is limited to no stop diving by definition??
>>>> 
>>>> I can understand its significance on a deco dive, but you all do
> realize
>>>> that if your worst fears come true and you undergo a buoyant ascent ,
>> you
>>>> are merely performing skills practice?? That evey agency has blow and
> go
>> as
>>>> its last resort for ndl diving?
>>>> 
>>>> have any of you removed your weights during a dive? what was the
> result?
>> I
>>>> had my belt off three times in front of the class i was helping with
>> tonite,
>>>> no problem with an al 80 with an al plate and a 1/4 suit  in 12 ft of
>> water,
>>>> i had plenty of time to dump the bc and remain with my weight belt
> with
>> just
>>>> a little effort. Are we all just not paying attention?
>>>> 
>>>> worried about buckle failure? wear two.
>>>> 
>>>> We are not even going to get into the pony bottle, but fyi my
>> understanding
>>>> of hogarthian means ultra minimal as in no reserve gas, even in
>> overhead.
>>>> and of course the bottle is unnecessary for anything, you can either
>> blow
>>>> and go or you cant and if you cant you need a real redundant system,
> not
>> 13
>>>> freaking cu ft. This w/e i was forced to dive off the bow b/c the
>> customers
>>>> used up all the rack space with their pony bottles filled with nitrox
>> too
>>>> hot for the bottom< typical, they have all been hosed and regard dir
> as
>>>> internet bs>and then i had to endure the shop owners bitching about my
>>>> doubles being too much gear for the dives< which they were, but i
> needed
>>>> them empty and gas costs money so i aint freaking wasting it>so i am
>> ready
>>>> for all comers on this pony bullshit.
>>>> 
>>>> You dont need a pony bottle unless you are solo diving without a plan.
>>>> 
>>>> Think it through people.
>>>> 
>>>> Al Marvelli
>>>> 
>>>> PS if those two quarry guys dont send me snail addresses ill never be
>> able
>>>> to mail them schedules and since i lost my inbox i dont havetheir e
>>>> addresses, so get back to me fellas.
>>>> 
>>>> Paul Braunbehrens wrote:
>>>> 
>>>>> OK, I went through tons of archives last night, trying to get to the
>>>>> bottom of this.  First, let me tell you my setup.  I'm diving a
>>>>> backplate and wings, with a drysuit, and (for now) a single tank and
>>>>> a pony bottle.  Leaving enough air in my suit so I can still move and
>>>>> do a safety stop at the end of a dive, I need 17 pounds on my belt (I
>>>>> dive in cold water).
>>>>> 
>>>>> Right now this weight is on my weight belt, which is ok but not
> ideal.
>>>>> 
>>>>> Perusing the archives, it seems the consensus is to make a V weight
>>>>> for at least some of this.  Let's say it will weigh about 9 Pounds.
>>>>> This still leaves 8 pounds.  I could then either leave that on my
>>>>> weight belt, or I could put it in the Halcyon weight pouches.  I
>>>>> assume that when I go to doubles I won't need most of it anymore?
>>>>> Also, DiveRite sells a "trim weight" that will fit between the bolts
>>>>> on the backplate.  I was thinking of this as an option.
>>>>> 
>>>>> Also, I read a lot of posts saying the canister light is 6 pounds
>>>>> negative (or thereabouts).  Mine is 1.5 pounds negative, which means
>>>>> I have to account for that weight somewhere.
>>>>> 
>>>>> One post I read which made a lot of sense, said that you should have
>>>>> about 5 or 6 pounds of ditchable weight (if any).  When you ditch
>>>>> your weight you don't want to become so positive as to end up in
>>>>> lunar orbit.
>>>>> 
>>>>> I would like to get as close to hogarthian as possible before moving
>>>>> to doubles, so any help is appreciated.  I'm even moving my canister
>>>>> back on my harness (I had it upside down and attached to the
>>>>> backplate, but I find that it has a tendency to sit on the wiring
>>>>> connection...not good).
>>>>> 
>>>>> Cheers,
>>>>> 
>>>>> --
>>>>> Paul Braunbehrens mailto:Bakalite@ba*.co*
>>>>> http://www.daw-mac.com Mailing list for digital audio on the mac
>>>>> --
>>>>> Send mail for the `techdiver' mailing list to
> `techdiver@aquanaut.com'.
>>>>> Send subscribe/unsubscribe requests to
>> `techdiver-request@aquanaut.com'.
>>>> 
>>>> 
>>>> 
>>>> --
>>>> Send mail for the `techdiver' mailing list to
> `techdiver@aquanaut.com'.
>>>> Send subscribe/unsubscribe requests to
> `techdiver-request@aquanaut.com'.
>>>> 
>>> 
>>> 
>>> --
>>> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
>>> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
>>> 
>> 
>> --
>> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
>> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
>> 
> 
> --
> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
> 


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]