Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Date: Fri, 31 Mar 2000 06:39:40 -0500
From: trey@ne*.co* (Trey)
To: Capt JT <captjt@mi*.co*>
CC: Kevin Connell <kevin@nw*.co*>, techdiver@aquanaut.com
Subject: Re: Stage Regs...was: DIN Fitting/A Clamp
JT - as you say, we leave the reg end hand tight - the hose must be on
for real.

Capt JT wrote:
> 
> >
> >JT - this is normally taken care of by switching lp hoses & 2nd stages,
> >not the whole assembly.
> >
> >Although, ever since I started using the "hand-tight lp hose" guideline,
> >I've blown more orings in the last 2 months than I have in the last 5 years.
> 
> I do not believe in switching the LP hose, to have it only hand tight will
> cause you to blow more o rings and have leaks. I will let my hose nut be
> loose at the second stage to change the second stage if need to. It is
> safer to just switch out the regs if the hose blows, stress will become a
> big deal if try to screw that hose back into the reg. I think. I've seen
> guys have a hard time doing it on land without gloves.
> 
> You can't learn to dive on the net, sooner or later you have to get in the
> water!
> 
> Your Guide to Great Wreck Diving along the East Coast & more
>   Web Site  http://www.capt-jt.com/
> Email     captjt@mi*.co*
> 
> --
> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]