Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Date: Fri, 31 Mar 2000 12:13:13 -0600
Subject: Re: Stage Regs...was: DIN Fitting/A Clamp
From: MPawlak <maciej.pawlak@va*.ed*>
To: Kevin Connell <kevin@nw*.co*>, Capt JT <captjt@mi*.co*>
CC: <techdiver@aquanaut.com>
Kevin,
I don't think having 1st stage/LP hose connection hand-tight is a good idea
since oring can be extruded very easily (as you've empirically discovered
:-)). However, 2nd stage can be hand-tight and swapped when necessary,
because here oring is sealed by the gas pressure regardless of  how tight
the hose nut is.

Maciej Pawlak
Vanderbilt University

> From: "Kevin Connell" <kevin@nw*.co*>
> Date: Thu, 30 Mar 2000 12:49:30 -0800
> To: Capt JT <captjt@mi*.co*>
> Cc: techdiver@aquanaut.com
> Subject: Re: Stage Regs...was: DIN Fitting/A Clamp

> JT - this is normally taken care of by switching lp hoses & 2nd stages, not
> the whole assembly.
> 
> Although, ever since I started using the "hand-tight lp hose" guideline,
> I've blown more orings in the last 2 months than I have in the last 5 years.
> 
> 
> ----------------------------------
> Kevin Connell <kevin@nw*.co*>

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]