Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: "Mcinnis, Don" <Don.Mcinnis@in*.co*>
To: "'techdiver@aquanaut.com'" <techdiver@aquanaut.com>
Subject: FW: Deco question
Date: Tue, 28 Dec 1999 06:40:29 -0600
Nitrox 21, hmmm that sounds familiar... Oh yeah, it's called AIR. First off,
why are you using such a low "mix" for your second dive. If it is because it
is too deep for higher percentages of O2 then you should be doing another
trimix dive. Otherwise bump up the amount of O2 in the second dive. This
will lower the overall N2 loading for the two dives considerably.

	Regards,

	Don

-----Original Message-----
From: Taylor, John [mailto:john.taylor@cs*.co*.uk*] 
Sent: Monday, December 27, 1999 10:16 PM
To: 'techdiver@aquanaut.com'
Subject: Deco question


Dear list,

Lets say I do a trimix dive followed by a nitrox dive. I'll use 14/50 for my
trimix dive, and some time later, I'll use Nitrox 21 for my second dive.

My tissues ongas Helium and Nitrogen during the trimix dive. During the deco
for this dive, the helium loading disappears quickly, so, effectively, the
limiting factor for final exit from the water becomes the nitrogen loading.

Using Buhlmann ZHL-16B, it appears that the oxygen fraction in the mix is
largely irrelevant (bear with me at this point!). In most implementations I
have seen, the Fo2 is only used to determine which deco gas to use (i.e. the
one which, if used, would not cause the selected Max PPo2 to be exceeded).
Also, the implementations I have seen simply add the He and N2 loadings
together.

Would the residual N2 tissue loading be the same after my mix dive as if I'd
dived the same profile on Eanx 64?

Could I consider the (equivalent) N2 gas loading only when planning my
second (nitrox) dive?

JT
--
John Taylor
CREDIT | FIRST
SUISSE | BOSTON
Equity Derivatives and Convertibles Unit
* +852 2101 6927 (Office)
* +852 2101 7698 (Fax)
* +852 9031 6395 (Mobile)
* mailto:john.taylor@cs*.co*.uk*
* mailto:live4diving@ho*.co*




This message is for the named person's use only.  It may contain
confidential, proprietary or legally privileged information.  No
confidentiality or privilege is waived or lost by any mistransmission.
If you receive this message in error, please immediately delete it and all
copies of it from your system, destroy any hard copies of it and notify the
sender.  You must not, directly or indirectly, use, disclose, distribute, 
print, or copy any part of this message if you are not the intended 
recipient. CREDIT SUISSE GROUP, CREDIT SUISSE FIRST BOSTON, and each of
their subsidiaries each reserve  the right to monitor all e-mail 
communications through its networks.  Any views expressed in this message
are those of the individual sender, except where the message states 
otherwise and the sender is authorised to state them to be the views of 
any such entity.



--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]