This brings up another issue:  The new EE reels (which are very nice) come 
with a double ender configed metal to metal.  While you could always cut 
the harness, but I think if it were in the rear, youd be screwed if you 
were scootering.  Perhaps this should be rigged with a bolt snap tied to it 
as well.  (and that is the answer to your question, simon)


At 10:48 AM 12/15/1999 +0200, Simon Murray wrote:
>I was going through all my gear to re-check for any metal to metal 
>connections and I found one that seems to be fairly common: the clip on 
>jump or exploration reels almost always seems to be joined to the reel by 
>a metal band that is bent around the eye of the clip and then bolted to 
>the reel.
>
>Is the DIR procedure to re-rig reels and tie the clip to the reel with 
>cave line or is there a reason that a metal to metal connection is 
>acceptable in this situation ?
>
>Simon


----------------------------------
  Kevin Connell <kevin@nw*.co*>

  NW Labor Systems, Inc
  http://www.nwls.com


----------------------------------

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]