Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: "Cam Banks" <cam_banks@ho*.co*>
To: artg@ec*.ne*, cam_banks@ho*.co*
Cc: techdiver@aquanaut.com
Subject: Re: dir bolt snaps
Date: Thu, 02 Dec 1999 14:02:49 PST
Okay, I'm getting the idea that the big eye snaps are the key.  I had been 
using the small eye ones.  I'll try it.  Thanks.

Cam


>From: Art Greenberg <artg@ec*.ne*>
>To: Cam Banks <cam_banks@ho*.co*>
>CC: techdiver@aquanaut.com
>Subject: Re: dir bolt snaps
>Date: Thu, 2 Dec 1999 11:54:07 -0500 (Eastern Standard Time)
>
>On Wed, 1 Dec 1999, Cam Banks wrote:
>
> > I cannot operate itty-bitty brass bolt snaps with 5mm gloves on
> > and loose pre-bent d-rings.
> >
> > I cannot find any large stainless bolt-snaps.
>
>Cam,
>
>I bought a bunch of 4" SS snaps from McMaster-Carr a little over a year
>ago. NONE of them made it all the way through this season. The spring
>inside was NOT the right material. Check the archives, I asked about snaps
>and there was some decent discussion following that.
>
>I also purchased a bunch of 2.75" long SS snaps, also from McMaster-Carr,
>that have turned out to be properly built. Out of desparation, I installed
>them as the larger ones failed. I can now operate these snaps with my
>3-finger mits, no sweat. All if took was some practice. Try it, you might
>find this works for you as well.
>
>--
>Art Greenberg
>artg@ec*.ne*
>
>

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]