Mailing List Archive Mailing List Archive
Someone emulating George I. III (and very poorly I might add) wrote hiding from the world by not posting his name... > Hello, dumb fuck Sorry, he doesn't work here, you must have me confused with someone else... >- what do you think would happen to the 250 psi hose if the relief >valve were 2000 psi - get a grip . Taa-ching! First of all I would like to thank Dan Terrin of Posidon USA for answering me personally with the information I was seeking. The spring can be replaced with a different value, but it does void all warranty and the Posidon dealers are not supoposed to do it. All the rest of you who reponded were quite correct with the approx 247 psi / 7 bar notation. Even the part number designations helped out. >It goes off at 5000 psi so your tank won't blow up. To quote Jammer... "Huh?" What good is a pressure purge valve prior to the 2nd stage to prevent a second stage free-flow with 5k gate value? With the valve, any loss of intermediate pressure control at the first stage would be released at the the purge valve to keep the HP non-regulated source from delivering directly to the 2nd. If the release point was 5K "so (my) tank won't blow up", how would the device prevent the HP non-regulated delivery directly to the 2nd with, say, only 1.2K in the tank? Not that Posidons regularly do this of course ( I am aware of the HP seat problems though). Initially I was told by a prominant SCUBA hardware dealer from the UK (Manchester Systems) that the spring was designed to finalize gate release at approximately 2K psi, AND my local Posidon dealer (West Coast Diver's Supply) stated to me they could make the mod when I inquired them on the issue. This didn't sound quite correct so I asked the someone else's opinion. In this case it was the technial community on the newsgroup group / mailing lists. BTW, I know damned good & well what my secondary hose will handle (FYI, it's somewhat stiff since it is RATED to 1.25K PSI manufactured by Bendix Marine for salt duty). The Odin is being used as a secondary on a short hose. The hose did not come with the reg set when originally purchased from the dealer. The 2nd stage was fitted after the fact, as was the Odin's pressure purge valve/sleeve. The release gate value of the purge valve/spring is to be 248 psi (+/- 2 psi). At this point after being enlightened by Mr. Terrin, I will probably change the hose back to the original Posidon part (it came in the box along with the reg). My question was to ask if there was a way to adjust this "advised" pressure gate release (not the rating) from the mentioned 2K PSI. If the shop and delaer was feeding me a line (since I am not privy to the repair/service manuals) then I would expect someone to point that out. That's what a discussion group on technical diving/gear does, doesn't it? What I don't expect is to be called names for searching out the truth if I suspect an anomolity. But hey, I a much bigger guy than that, I don't need to fire back. At least I have the yarbles to post my name to my writings. T.MAY LA SAT TECH/KEYSTONE Facility Director www.keystonecom.com www.netcom.com/~tleemay/ -- Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. Send list subscription requests to `techdiver-request@aquanaut.com'.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]