Mailing List Archive Mailing List Archive
> With your regulators mounted perpendicular to the normal way, did you > need to make any modifications to the hose configurations to prevent > sharp bends or kinks? I recall that at TEK you showed me a rig that > used Scubapro Mk 10 first stages. The Mark 10's have pretty good > mounting options. Was that enough, or do you use an elbow connector? The Mk-10s provided plenty of options for configuration, so the hoses were fine. They were on the OMS Y-valve. I set it up so that the Mk-10 pointed upward on the primary regulator, and downward on the backup. I had a little more difficulty with the Odin first stage on the genesis valve on the left tank. I got the hoses to go almost exactly where I wanted them to go, but not quite (close enough that I didn't need elbows). The ponies (which are upside-down, as you may recall) fit perfectly for hose positioning. Aloha, Rich Richard Pyle deepreef@bi*.bi*.ha*.or* ******************************************************************* "WHATEVER happens to you when you willingly go underwater is COMPLETELY and ENTIRELY your own responsibility! If you cannot accept this responsibility, stay out of the water!" *******************************************************************
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]