Hey George,
          Thanks for the feedback...someone has to keep the monkeys in
line :-)

FYI, I have modelled the 300 bar Din valve gas savers/manifold
protectors I am manufacturing to be identical to the working thread
system componentry of an Apeks regulator. 

Each is a triple chromed solid brass three piece unit and fully o-ring
sealed, which also is available in a flow restrictor version, with a
.4mm flow restricting orafice built in for use with an "Qxycheq
Expedition" O2 anylizer,of which I am the NZ dealer, or any anylizer for
that matter.
There are two flats for unscrewing if accidentally pressurised (gas
saver) and fyll knurling for ease of insertion/removal from threads.

The 300 bar DIN regulator end caps are triple chromed solid brass, fully
knurled and seal to the reg 0-ring just like a manifold does.

Warmest Regards

Paul Berry - Director 
Inner Realm 
The Measure Of Excellence In DIR Technical Diving Systems 
www.innerrealm.co.nz 
DIR-NZ 




-----Original Message-----
From: George Irvine [mailto:trey@my*.ne*] 
Sent: Saturday, 23 November 2002 11:50 p.m.
To: Paul - Inner Realm; dis-uk@ya*.co*
Cc: 'Quest (GUE QUEST)'; 'TECHDIVER'; 'DIR_UK'
Subject: RE: [DIS-UK] Undersuits


You scared me there. I was seeing Cobra Guards or those things the
strokes put over the knobs. DUI is expensive everywhere - just have to
do with what gives you the most similarities.

-----Original Message-----
From: Paul - Inner Realm [mailto:Paul@in*.co*.nz*]
Sent: Friday, November 22, 2002 10:25 PM
To: 'George Irvine'; dis-uk@ya*.co*
Cc: 'Quest (GUE QUEST)'; 'TECHDIVER'; 'DIR_UK'
Subject: RE: [DIS-UK] Undersuits


Yeah, Yeah, thanks George :-)

I woundered who would pull me up on this one...

The "DIR" comment just a little bit of a "sales pitch", as is the
advertising spam...sincere apologies.

The DUI is a great product, as I dive one also, but horrendously
expensive to purchase upon this side of the world and things can always
be refined with a MTM option a bonus IMHO for a start.

Not reg protectors as such, but end caps which keep the O-rings upon the
regs clean and also seal up against the reg o-ring to enable them to be
completely immersed for washing...not that with Apeks it's an issue or
that many people bother these days unless diving salt like we do mostly.

Just doing my best to be innovative and get some quality product out to
the guys who are interested.

20 series low profile Titanium mags for the Vette anybody?

Kind Regards

Paul Berry - Director
Inner Realm
The Measure Of Excellence In DIR Technical Diving Systems
www.innerrealm.co.nz DIR-NZ



-----Original Message-----
From: George Irvine [mailto:trey@my*.ne*]
Sent: Saturday, 23 November 2002 3:09 p.m.
To: Paul - Inner Realm; dis-uk@ya*.co*
Cc: Quest (GUE QUEST); TECHDIVER; DIR_UK
Subject: RE: [DIS-UK] Undersuits


MessagePaul, could you make me some new wheels for my car while you are
at it. I am no so sure about these round ones anymore. Reg protectors?
Hello , Mom? I notice the word "DIR" after some of these lists copied
here.
  -----Original Message-----
  From: Paul - Inner Realm [mailto:Paul@in*.co*.nz*]
  Sent: Friday, November 22, 2002 7:00 PM
  To: dis-uk@ya*.co*
  Cc: Quest (GUE QUEST); TECHDIVER; DIR_UK
  Subject: RE: [DIS-UK] Undersuits


  Hey Guys,
                I have orderd the 400G bolts of Thinsulate from 3M NZ ,
which take 3 months to arrive from the states.

  The actual patterns are also sorted as is the manufacturing process ,
but the other materials needed ;as in a quality waterproof/breathable
exterior nylob shell and moisture wicking interior lining that wont
allow thinsulate fibre migration are still being sourced...and proving
difficult to find here.

  I could really do with some leads upon these other materials from
anyone with any known manufacturers/suppliers I may try... if anyone has
any clues I would be most appreciative? , as the local suppliers are so
"backward' even the 3M rep had never seen 400g before and had to order
min a sample especially ;-)

  These MTM suits will be a great price compared to DUI and far better
quality of design/maunfacture.

  Anyone ever wondered why there wasnt a buttonhole pee valve hose
opening
integrated into them...?                           me too :-) no more
half
opened zips boys!
  I am also working with an idea of velcro tabs or similar  on the
booties to stop the legs riding up upon donning the sui as the ankle
elastic worn in the arch causes foot cramp in some people.


  There will be quite a few modifications for diver comfort, ideas and
feedback, as to what you (fellow divers) feel would improve the quality
of your comfort  is more than welcome...

  I have also been very focussed upon the Innerrealm 300 bar tank
va/ve/manifold and Reg protectors I have designed. They are almost ready
,having been delayed by the Machine shop.
  They are VERY nice and I will advise as soon as I get pictures upon
the site for you to take a look so I can take orders for supply.

  Paul Berry - Director
  Inner Realm
  The Measure Of Excellence In DIR Technical Diving Systems
  www.innerrealm.co.nz
  DIR-NZ

    -----Original Message-----
    From: Bob Cooper [mailto:bob@bo*.fs*.co*.uk*]
    Sent: Saturday, 23 November 2002 10:16 a.m.
    To: dis-uk@ya*.co*
    Subject: Re: [DIS-UK] Undersuits


    "The new Inner Realm "Couture" range of 400G Type B thinsulate fully
made to
    measure undergarments are currently being designed and will be ready
for
    release early in 2003. These sensational garments will exceed your
every
    expectation of quality and easily be the finest available
worldwide!"

    http://www.innerrealm.co.nz/pricing.asp

    > Which reminds me .. someone was threatening to import that 3M
    > stuff into some antipodean location and manufacture M2M
    > undersuits ?
    >
    > I wonder if there are any news/updates on that ?



    DIS-UK: This list is dedicated to Diving It Simple and Safe. The
material on this list is private to the list members. Do not cross post
it without permission of the author. To Post a message, send it to:
dis-uk@eG*.co*




    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.




--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]