Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Date: Tue, 27 Aug 2002 14:10:56 +0200
From: mat.voss@t-*.de* (Matthias Voss)
To: George Irvine <trey@my*.ne*>
CC: techdiver@aquanaut.com
Subject: Re: wing + inner tube
I believe I was not very precise here.
With  the inner tube, which size to start with ? Motorcycle, car,
lorry-size ? It will well protect, and may be clean out some of the
bladders wrinkles.

The tube with the hole, I wanted to insert it inside the inner bladder,
via the bottom dump, and feed it right  through to the opposite side
horse shoe like.
Matthias


George Irvine schrieb:
> 
> You don't need the holes - it will work if you just lay an inner tube over
> the bladder. It must be cut all the way around on one side and cut to the
> shape of the bladder.
> 
> -----Original Message-----
> From: Matthias Voss [mailto:mat.voss@t-*.de*]
> Sent: Monday, August 26, 2002 5:49 PM
> To: techdiver@aquanaut.com
> Cc: Techdiver@Aquanaut.Com
> Subject: wing + inner tube
> 
> Having tried some wings ( except for the halcyon range), I have some
> criticism for most of them.
> 
> Especially when turning from one side o the other, there are 2 things
> which botehr me.
> 
> One is, when the gas is changing sides, a loud , annoying gargling
> appears, sometimes loud enough to scare away critters, or be otherwise
> unpleasant.
> 
> The other is, gas sometimes does not want to shift sides, but keeps on
> sticking in one side, leaving me with a annoying dysbalance which must
> be fought against by some wriggling.
> 
> I intend to insert a 12mm ID plastik tube with hole all over its length
> at the circumference, so gas can enter the "bus" and leave, distribute
> anywhere without being hindered by walls sticking close together.
> 
> Anyone tried this before ?
> I know some dive so have but they belong to the league "I can tell you
> but will have to shoot you then".
> Matthias
> --
> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]