Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: trey@ne*.co* (Trey)
To: "Gliviak, Jozef" <Jozef.Gliviak@co*.co*>
Cc: "'Techdiver@Aquanaut.Com'" <techdiver@aquanaut.com>
Subject: RE: Towing stages, BC for stages
Date: Tue, 13 Nov 2001 06:48:29 -0500
Use the tire fill adaptor for a lp hose. They only need a little bit of
inflation.

-----Original Message-----
From: Gliviak, Jozef [mailto:Jozef.Gliviak@co*.co*]
Sent: Tuesday, November 13, 2001 4:22 AM
To: 'Trey'
Cc: 'Techdiver@Aquanaut.Com'
Subject: RE: Towing stages, BC for stages


Yes, that was clear to me. Question is around the details.
How do you fill it with gas? Do you use and adapter that plugs into the BC
or dry suit inflator hose that fills the standard tire valve? Or any other
method?
How do you release the gas from this device when you need? To manipulate
with tire valve in my dry glowes seems little bit unpractical.


Second question is around the way you clip these stages for towing. Can you
explain it? Are there any pictures I can see?


Best regards

 Jozef



-----Original Message-----
From: Trey [mailto:trey@ne*.co*]
Sent: 13. novembra 2001 4:30
To: Gliviak, Jozef
Cc: 'Techdiver@Aquanaut.Com'
Subject: RE: Towing stages, BC for stages


It is simply a bicycle tube wound abound the neck of the bottle - no big
deal. Use more helium and obviate the need.

--- "Gliviak, Jozef" <Jozef.Gliviak@co*.co*> wrote:
> Hello George,
>
> Short time ago I've asked you about the small
> buyocancy device you are using
> for fine-tuning weight of stages when you pull many
> of them in a string.
> I've checked your photos on WKPP/GUE sites but
> didn't found any picture
> where I could clearly see this. Would you be so kind
> and publish it
> somewhere to take a close look on the way you do it
> so I don't have to
> reinvent the wheel.
>
> Can you also describe the setup/attachment of a
> string of stages when you
> need to transport them in order to set up safeties?
>
> Best regards
>
>  Jozef Gliviak
>  Slovakia

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]