Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: "Mark Gram" <markgram@me*.ne*>
To: <ricky@th*.ca*>, <techdiver@aquanaut.com>
Subject: Re: reg config and spg
Date: Mon, 13 Aug 2001 19:51:10 -0400
Two ways to know the left post has rolled shut: If you look at your spg over
a span of time and it doesn't move, you can assume you have rolled the valve
shut. Also, either your drysuit inflator or your wing inflator is going to
be connected to the left regulator. If the valve is shut, that inflator
obviously won't work.
----- Original Message -----
From: <ricky@th*.ca*>
To: <techdiver@aquanaut.com>
Sent: Monday, August 13, 2001 3:18 PM
Subject: reg config and spg


> Hey folks!  While surfing today I came across this wealth of knowledge
and, of course, signed up immediately.
>
> I'm hoping to gather some opinion on a confusion I have with the DIR reg
and spg configuration (please be kind... DIR configuration is new to me - I
currently bungy the 7' hose and breathe off the short hose - but I am
looking at alternatives (always!)):
>
> DIR tells us to wrap the 7' hose from the right post around our bodies and
to breathe off of that 2nd.  DIR tells us to use the reg from the left post
(on the short hose) as our alternate.  Finally, DIR tells us to put the spg
on the left post (I think).
>
> If the above DIR configuration is correct - is it not possible to have a
situation where you're diving in an overhead environment and the left post
gets rolled off? In this event, since there is no depressurization of the
reg on the left post the spg would continue to read a misleadingly high
pressure.  This strikes me as a "bad thing".
>
> Thoughts,
>   Rick...
>
> --------------------------------------------------------------------
> Mail2Web - Check your email from the web at
> http://www.mail2web.com/ .
>
> --
> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]