Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: "Gareth Jones" <gljones@an*.fr*.co*.uk*>
To: "Techdiver" <techdiver@aquanaut.com>
Subject: Re: Steel cylinder internal rust
Date: Sat, 2 Jun 2001 22:35:50 +0100
Jim, I'm not sure where you are coming from here. If the cylinder has passed
a hydraulic test, then the pressure vessel is proved sound. Hydrochloric
acid is soluable in water, and so easy to remove from the cylinder wall. I
can't see what the problem is.
Cheers,
Gareth
----- Original Message -----
From: Jim Cobb <cobber@ci*.co*>
To: Mantis Diving <dive@ma*.co*.au*>; Techdiver@Aquanaut.Com
<techdiver@aquanaut.com>
Sent: Saturday, June 02, 2001 1:30 PM
Subject: Re: Steel cylinder internal rust


> You need to throw these cylinders out, using the acid ruined them.
>
>    Jim
> > From: Mantis Diving <dive@ma*.co*.au*>
> > Date: Sat, 02 Jun 2001 10:49:38 +1000
> > To: "Techdiver@Aquanaut.Com" <techdiver@aquanaut.com>
> > Subject: Steel cylinder internal rust
> >
> > Hi,
> >
> > I had a diver turn up with some 72's. They were to be hydro'd but there
was
> > internal rust. The diver took them away to clean them and brought them
back
> > a couple of days later rust free.
> >
> > The cylinders were sent for hydro and passed. When the diver picked them
he
> > told me that he had not rumbled them instead he had used Hydrocloric
acid
> > to remove the rust from inside the cylinder. From what I understand the
> > acid breaks the bond between the rust and the steel.
> >
> > My question is apart from the obvious (ensuring that all traces of the
acid
> > are removed from inside the cylinder) is there anything else I need to
be
> > aware of as a gas fill provider. The diver wants to twin them up for 60m
> > dives, as he is a mix diver I am assuming he may request a mix fill at
some
> > point.
> >
> > I would rather not fill them if there are any safety issues.
> >
> > To restate, they were Hydro'd and passed 'after' the acid clean.
> >
> > Paul O'Malley


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]