I used a right angle grinder, the disc is just the
right thickness. Then cleaned it up with a file and a
dremel.

Dave

--- Rich Gulley <richgulley@us*.ne*> wrote:
> Just make the slot in the plate wider. I used a die
> grinder and it cut threw
> the stainless very easily. A Dremel tool would also
> work. You could also use
> a drill if you had to.
> 
> Good luck,
> Rich
> 
> ----- Original Message -----
> From: "Paul Braunbehrens" <Bakalite@ba*.co*>
> To: "Simon L Hartley" <shartley@sc*.ed*.au*>;
> <techdiver@aquanaut.com>
> Sent: Monday, April 30, 2001 8:57 AM
> Subject: Re:Source
> 
> 
> > Simon L Hartley wrote:
> >
> > >
> > >2) I then pass the webbing through the slot in
> the backplate (the slot on
> > >mine is only 1 inch so I folded each edge of the
> webbing in and fed it
> > >through the slot).  BTW I have the loose tongue
> of the webbing to the
> > >inside so the webbing goes in through the back of
> the back plate,
> >
> >
> > Hmm, maybe my webbing is thicker.  There is no way
> it was going
> > through there.  Did you use any tricks, or was it
> especially hard to
> > get it through?
> >
> > I like your method better than mine.  I also use
> the crotch strap
> > when lifting the tanks, often I worry that the
> bolt connection may be
> > a little too prone to tearing out the hole of the
> webbing.  No
> > problem so far, but if you can improve it...why
> not.
> > --
> > Paul B.
> > --
> > Send mail for the `techdiver' mailing list to
> `techdiver@aquanaut.com'.
> > Send subscribe/unsubscribe requests to
> `techdiver-request@aquanaut.com'.
> >
> 
> --
> Send mail for the `techdiver' mailing list to
> `techdiver@aquanaut.com'.
> Send subscribe/unsubscribe requests to
> `techdiver-request@aquanaut.com'.
> 
> 
> 


__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]