Mailing List Archive Mailing List Archive
Wow... If you cannot achieve positive buoyancy on the surface with that wing something is seriously wrong and you should never have to pull the drop weights to do it.....you'll end up as one of those "surface drowning" statistics... JG ******************************************** Ian Puleston wrote: > Just to add an addendum to this old thread - I received my new 45lb Pioneer > single-tank wing from Halcyon a couple of weeks ago, and after some shore > diving with it, took it for its first dive from an inflatable yesterday. > > First the good stuff - I don't seem to need as much weight with this set up > as I did with my old Zeagle ranger (presumably because less bulk == less > buoyancy). I managed to drop 5 lbs of lead which brings the total weight > (-ve buoyancy) of my rig down to about 30lbs. > > But the 45lb Pioneer wing would not float it - even fully inflated it would > sink. However, that's partially compensated for by Halcyon's great ACB > weighting system - at the end of the dive its really easy to pull the weight > pouches and throw them into the boat, and with the big handles there's > little chance of dropping them. Just gotta be careful at the start of the > dive. > > Ian > > > I dive N. Cal and dive a lot from inflatables - that means that the wing > > needs to be able to float the scuba unit whilst getting in and > > out. I have a > > SS backplate that, for recreational diving, I use with a single HP 80 with > > an additional 18lbs of lead. With the single tank the total weight > > (actually -ve buoyancy) that the wing needs to support is approximately: > > Lead 18lbs > > Backplate 6lbs > > Canister light 2lbs > > Tank (full) 7lbs > > 2 x regulators 2lbs > > > > Total: 35lbs > > > > So the 36lb Pioneer wing is barely (read not really) adequate, > > and I've just > > purchased a 45lb Pioneer wing. > > -- > Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. > Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'. -- Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]