Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: "dmdalton" <dmdalton@qu*.ne*>
To: "Steve" <se2schul@uw*.ca*>, <techdiver@aquanaut.com>
Subject: Re: Spring fin straps
Date: Thu, 27 Jan 2000 21:21:38 -0500
Steve

There are several different buckles used depending on the fin. I use
Voit-Swimaster Mark Xs for wetsuit boots and Turtle Fins for my drysuit. The
Mark Xs had a buckle formed out of bent aluminum wire about 3/16" thick. On
those, I straightened the wire somewhat and cut off the cross bar and used
the wire to hold on the blocks. On the Turtle Fins and IDI Power Fins the
buckle is staked on and you have to cut it off. I think Jet Fins are the
same. However, if you decide you don't like them and want to go back to
rubber straps, Global sells replacement buckles for a couple of bucks. Also
if you are not sure you will like them, leave the metal buckle on and tie
the spring to it with cave line - my son's are still like that and they work
well - looks ugly but it will let you decide if you like them.

Dave Dalton

----- Original Message -----
From: Steve <se2schul@uw*.ca*>
To: <techdiver@aquanaut.com>
Sent: Thursday, January 27, 2000 7:22 PM
Subject: Re: Spring fin straps


>
> Is there any way of removing the original straps without destroying the
> original attachement clip?
>
> It looks to me as though the only way of getting them off is to bend them
> with pliers.  Is this right?  Can you bend them back to re-attach the
> original attachement clip?
>
> Steve
>
> ----- Original Message -----
> From: David Dalton <david_dalton@ho*.co*>
> To: <harrison@ge*.co*>; <techdiver@aquanaut.com>
> Sent: Thursday, January 27, 2000 1:42 PM
> Subject: Re: Spring fin straps
>
>
> > Harrison,
> >
> > Per your request:
> >
> > http://www.cisatlantic.com/trimix/fins/sprstrps.htm
> >
> > is a page I authored on how to make your own (and attach them) that Jim
> Cobb
> > is hosting on his superb Trimix site.
> >
> > http://www.fifthd.com/gear/
> >
> > is a page authored by Jon Breazile which shows the Oceanic spring straps
> and
> > how they attach to Jet Fins.
> >
> > Dave Dalton
> >
> >
> > >List:
> > >Does anyone know the URL of a site illustrating the "how to"
replacement
> of
> > >fin straps with springs?
> > >
> > >Thanks in advance,
> > >
> > >Harrison
> > >--
> > >Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> > >Send subscribe/unsubscribe requests to
`techdiver-request@aquanaut.com'.
> > >
> >
> > ______________________________________________________
> > Get Your Private, Free Email at http://www.hotmail.com
> >
> > --
> > Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> > Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
>
> --
> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
>

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]