Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: James Dibbs <JDibbs@ma*.co*.au*>
To: "'Shimell, David (shimell)'" <shimell@se*.co*>,
     Manos Manoli
     ,
     Tech Diver
Subject: RE: Hard to get out
Date: Mon, 24 Jan 2000 11:54:31 +1100
Or do the "Chicken Wing" thing with your arm and push it through. 

Just remember to unclip your drysuit hose and backup reg first. I 
did this yesterday to get back into an inflatable after a dive and it worked
great.

James Dibbs
Sydney, Australia
jdibbs@ma*.co*.au*

-----Original Message-----
From: Shimell, David (shimell) [mailto:shimell@se*.co*]
Sent: Saturday, 22 January 2000 12:40 AM
To: Manos Manoli; Tech Diver
Subject: RE: Hard to get out


Manos

As Peter said, don't.  If loosening the harness does not work.  Ensure the
wings are not fully inflated as this removes the slack needed to get of the
them.  Secondly, an easy way out is to flip the entire rig over your head,
being careful to disconnect everything.  However, with a properly adjusted
harness a conventional doff will work.

David Shimell
Email: shimell@se*.co* <mailto:shimell@se*.co*> 
Project Manager, IBM NUMA-Q, Sequent Computer Systems Limited,
Weybridge Business Park, Addlestone Road, Weybridge, Surrey, KT15 2UF, UK
registered in England and Wales under company number: 1999363, registered
office as above

-----Original Message-----
From:	Manos Manoli [SMTP:manos@ma*.co*.cy*]
Sent:	Friday, January 21, 2000 10:33 AM
To:	Tech Diver
Subject:	Hard to get out

I have just finish the Diving tests on my new Hardplate it works fine.
My only serious problem is ( try not to laugh ) that on the surface i
cannot get out of it. The inflated wings push slightly against my body
so the harness gets tight on me. I know is not DIR to install plastic
joins but i was thinking of installing only one at the side. Any ideas?

Manos.
--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]