Dave, please see www.capt-jt.com and read his story about a recent Doria death he had the displeasure of doing the body recovery on. A mitigating factor appears to be that the victim lost the down-line and, due to a configuration similar to the one you favor, got so winded getting back to the line he apparently had a CO2 blackout, sank like a rock and died. He too had more dives than God but is still dead, dead, dead. IP's learn from mistakes, usually gleaned from the pile of rubble and large hole in the ground the pilot-in-error made. I am sure you have many stories about this guy and that guy who augured in due to this mistake or that mistake. Jim ------------------------------------------------------------------- Learn About Trimix at http://www.cisatlantic.com/trimix/trimix.html > From: "Dave Sutton" <pilots@na*.ne*> > Reply-To: "Dave Sutton" <dsutton@re*.or*> > Date: Fri, 22 Oct 1999 10:01:39 -0400 > To: "Anthony Appleyard" <mclssaa2@fs*.mt*.um*.ac*.uk*>, > <techdiver@aquanaut.com> > Subject: Re: streamlining of scuba gear > > -But-, and I mean this sincerely, there are more than one way to do all of > this, > and for -some- diving applications drag is not nearly the issue that it is > for > others. A scootering diver going into a cave requires absolute minimum drag. > A boat wreck diver can very likely stand a lot more, especially if his > diving is > based on excavation of a small area of a sand-filled wreck. He really only > swims the length of the boat to the anchor line, descends, makes his way to > a site where he might spend an hour not moving more than two feet and > then back to the anchor line. So once again, use the correct tool to hit the > correct nail. A Cave-divers gear is 80% common in rigging and use as a > deep wreck divers gear. But that 20% difference should be recognized as > a valid change for environmental changes. Carriage of tools is not a cave > divers mission. Nor is setting up an 'off anchor-line' deco system. But > I'm not nearly as dependant on lights as a cave diver. And I deal with a > much > less benign entry/exit situation, so my gear must be tight to work in the > splash-zone. There are many small changes, but the core techniques are the > same. -- Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]