Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

To: techdiver@opal.com
Subject: Re: Viton (registered trademark)
From: <AVarouxis@ao*.co*>
Date: Tue, 20 Dec 1994 14:58:40 -0500
FLUOROCARBON RUBBER (FKM)
Typical trade names:

Fluorel			3M
Kalrex (high temp)	E I duPont
Kel-F			3M (formerly Kellogg)
Viton			E I duPont
Technoflon		Montedison  USA

ASTM   D1418 Designation: FKM
ASTM D2000/SAE J200 Type Class: HK


Fluorocarbon elastomers were first introduced in the mid 1950's.  Since then
they have grown to major importance in the seal industry. Due to its wide
spectrum chemical compatibility and temperature range and its low compression
set, fluorocarbon rubber is the most significant single elastomer development
in recent history.
Its working temperature range is considered to be -15� to +400� F (-29� to
+204� C), but it will take temperatures up to 600� F (316� C) for short
periods of time, and Du Pont's Kalrez is normally recommended up to 500� F
(260� C). On the low temperature end, Parker's compound V835-75 will seal
down to -40� F (-40� C) in a static seal. Though the standard compounds have
been known to seal at -65� F 
(-54� C) in some special static applications, the normal low temperature
limit is -15� F (-26� C).
Special formulations having extra chemical resistance are also available, and
new types are being developed constantly.
Fluorocarbon o-rings should be considered for seal use in aircraft,
automobile and other mechanical devices requiring maximum resistance to
elevated temperature and to many functional fluids.

FKM is recommended for:
Petroleum oils
Di-ester base lubricants (MIL-L-7808, MIL-L-6085).
Silicate ester base lubricants (MLO 8200, MLO 8515, OS-45.)
Silicone fluids and greases.
Halogenated hydrocarbons (carbon tetrachloride, trichloroethylene).
Selected phosphate ester fluids.
Acids.

FKM is not recommended for:
Ketones (MEK, acetone).
Skydrol fluids.
Amines (UDMH), anhydrous ammonia.
Low molecular weight esters and ethers.
Hot hydraulic or chlorosulfonic acids.


Information from the Parker O-ring handbook and Apple Rubber Products
handbook

Another viton experiment is:  

Place a known Viton o-ring in to a glass that contains Acetone

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]