Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Date: Wed, 07 Apr 1999 11:44:18 -0700
From: "Alfred J. Alapisco" <AquaLad@ix*.ne*.co*>
To: "George P. Wentland" <wentland@ns*.ac*.no*.ed*>
CC: techdiver@aquanaut.com, S I L E N T I M M E R S I O N <silent@cu*.ne*>
Subject: Re: Trimix Question

--------------9E20AA774C4DA64EE223CD99
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit


--------------9E20AA774C4DA64EE223CD99
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#FFFFFF">
 
<p>"George P. Wentland" wrote:
<blockquote TYPE=CITE><style></style>

<blockquote 
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px;
PADDING-LEFT: 5px; PADDING-RIGHT: 0px"> 
<br>Liability! Profitability!   1. If a business does not of
significant demand for a product they will not produce it. If a shop has
2-3 Certified Trimix divers that frequent the establishment, it is not
worthwhile to make the investment in supplies and training to properly
service this minority.   2. Lets take a look at liability. A
diver makes a dive on a 15/53 refill to 300 feet, he makes a mistake and
doesn't come up. Later it's discovered, after laboratory analysis, that
the mix was really 15/48. Narcosis may have been a contributing factor
to his death. Can you see the possible law suit? While Oxygen % can be
readily measured, equipment to measure Helium % is cost prohibitive and
not readily available to the dive industry. If you say cost bedamned see
paragraph 1. Good Diving by George
<br> 
<br> 
<br> 
<p>However, on that same note, if you are in an area you know there are
no shops to cater to your demand for trimix, then shouldn't you seek out
the information and knowledge to make your own. Mixing and blending is
not at all difficult. It is, however, a meticulous chore and denotes a
fine attention to detail. As for helium analyzation, here, at least, in
the Bay Area the gas suppliers usually have analyzers that you can use
when you purchase the gas. Why not use them. They are way too expensive
to buy and as for narcosis being a cause for DCS. .05% should not be the
major factor in that, especially with the differences in the compressibility
of the gasses you are mixing. But, seriously, how often do you really think
that the percentages of inert gases are exact in the mixes you dive?
<br>Nitrox is much easier than Trimix as far as blending is concerned.
<p>See you down under!</blockquote>
</blockquote>

</body>
</html>

--------------9E20AA774C4DA64EE223CD99--

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]