Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Date: Wed, 30 Sep 1998 07:42:52 -0700
To: "David Shimell (shimell)" <shimell@se*.co*>
From: Kevin Connell <kevin@nw*.co*>
Subject: RE: Trimix question
Cc: techdiver@aquanaut.com
But david, that wouldn't work here, because there's over 3 times as many
feet as there are meters!!

:-P

At 03:07 PM 9/29/98 +0100, you wrote:
>All
>
>>If one were going to use trimix in the deep rec/lite tec range,  as many
>>have been advocating here, for moderate exposures, ,  say, 100-160', 20-40
>>minute bottom, and wanted to have a fairly standard mix to use rather than
>>doing a different mix for every dive, what would one use?
>
>As a slight digression, it is worth developing standard mixes and tables for
>ranges of depths and times.  I dive mixes for every 10 m, i.e. I use 50, 60,
>70, 80 metre mixes together with the corresponding tables... My run times
>are also in 5 minute increments (easy to remember)  - usually 3 options with
>the middle run time being the planned run time.  This RT is usually set at
>around 90 minutes due to the water temperature in the UK.
>
>My tables for my 80m mix (16/44) go in 5 metre increments i.e. 80, 75, 70,
>65, 60, 55, 50.  Thus if we mix for an 80 metre dive and weather precludes
>diving this wreck, and we have to do a 63m wreck, then I would simply dive
>my 65 m tables for this gas.
>
>For multiple day diving, I see a penalty of around 4 minutes maximum.  I use
>the same tables but add in a minute here and there (one minute 3 m deeper
>than my first mandatory stop, 1 minute in the middle somewhere and 2 minutes
>on my last stop at 6 m.  This is in addition to 10 m/minute ascents and deep
>stops added.
>
>My tables are laminated and therefore re-usable.
>
>David Shimell
>Project Manager, Sequent Computer Systems Ltd., Sandton, South Africa.
>Email: shimell@se*.co* <mailto:shimell@se*.co*> 
>
>--
>Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
>Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

-----------------------------
Kevin Connell <kevin@nw*.co*>

NW Labor Systems 
http://www.nwls.com
-----------------------------

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]