Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Subject: Re: V-weights-simpler yet. . .
Date: Wed, 10 Dec 97 18:18:49 -0500
From: Jim Cobb <cobber@ci*.co*>
To: "Lee C Kresge" <nssdiver@ju*.co*>
cc: "Tech Diver" <techdiver@aquanaut.com>
Lee, does that playdough have to be oxygen cleaned?

  Jim

On 12/10/97 2:24 PM Jim Cobb wrote:

>Lee, your one lazy SOB, thats for sure. ;) This technique is so, so 
>hargarthian, I've got to give it a try.
>
>   Jim
>
>On 12/10/97 1:31 PM Lee C Kresge wrote:
>
>>Jim 
>>I made a V-weight when diving Al-80's right in my backplate.  
>>1. Drill a hole of appropriate size to fit a bolt through (~3/8" or so)
>>2. Make a Pla-Dough damn above and below the band bolts (lower and upper,
>>respectively)
>>3. Raise the head of the bolt (w/ a washer if you have one) w/ some
>>electrical tape or something
>>4. Pre-weigh the amount of lead that you want, add about 1/4-1/2 lb.  
>>5. Cast away.  Don't pour too slowly.  
>>
>>As you can probably guess, the bolt sticking through eases handling of
>>the backplate while assembling/disassembling, and while you're not
>>wearing it. Use a nut on the other side of the backplate to hold the
>>weight in place.   Also, even if it does come loose, the weight
>>absolutely, positively is not going anywhere.  The molten lead, believe
>>it or not, does not burn the Pla-Dough and does not contain enough heat
>>to melt the nylon webbing (if you're too lazy to take it all out/apart
>>like I was.  I cast ~6lbs I think).  However much you need, keep the
>>height below the bottom of the rounded angle where the backplate bends
>>into the V.  
>>
>>You do, of course, need to have an Al backplate. . .  
>>
>>Lee  
>
>
> -------------------------------------------------------------------
> Learn About Trimix at http://www.cisatlantic.com/trimix/trimix.html
>
>
>--
>Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
>Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
>


 -------------------------------------------------------------------
 Learn About Trimix At http://www.cisatlantic.com/trimix/trimix.html


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]