Hi Guys, I'm looking for experience or opinions on an idea before I take off half cocked and possibly do something dumb. In exploring new a cave, it looks like my buddy and I may be overreaching the limits of the battery capacity of the Mako's we'll be using. I'm thinking of using a 3/4 inch aluminum plate in the nose of the scooters so we can drill and tap holes for water tight electrical pass throughs. The wires from the motor and the battery would be brought outside the scooter body and connected together with a wet mate connector. This is so when the battery gets too low, I could hook the batteries from a light canister onto the motor and keep on going. The motor is set for 24 volts and I could easily wire the two batteries in a waist canister in series. The Mako batteries are 17 Amp-hours @ 24 volts and each waist canister would be an additional 7 Amp-hours @ 24 volts. Any thoughts? Thanks for your time. Take care and safe diving, Scott
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]