Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Date: Wed, 8 Nov 1995 17:49:45 GMT
From: Paul Chapman <paul@de*.de*.co*.uk*>
To: techdiver@terra.net
Subject: Re: Helium Pumping

I am so fed up with the problems of getting a mix fill round here (NW England) 
that I'm going to have to do it myself. Helium cylinders here (from British 
Oxygen anyway) only have a 137 bar (2000 psi) fill pressure, so even cascaded, 
you're going to loose a lot. My question is this:

Is there any reason why the outlet from a helium cylinder (appropriately 
regulated, restricted etc. to approx 1 bar of course) shouldn't be directly fed 
into a compressor inlet to be compressed into the scuba cylinders just like
air? 
That way you could drain the helium cylinder practically dry with little more 
than standard gear. I'm not talking about a lash-up here, proper regulator, 
hoses, inlet gauge, seals etc. for safety & to ensure no air inadvertently gets 
sucked in. I'm guessing that some sort of 1 bar reservoir is going to be needed 
to smooth out the compressor's first stage inlet pressure variations, but I 
can't see too many other major problems (apart from - if it such a good idea, 
why doesn't everybody do it)

This should be a simple yes or no question and I'm not really interested in 
anyone's "opinion" about it, so if you don't know what you're talking about, 
please don't bother to reply. But if you do, and especially if you know of 
commercially available gear or published information, I'd appreciate it.

Regards

---------------------------------------------------------------------------
| Paul Chapman    EMail paul@de*.de*.co*.uk*                          |
---------------------------------------------------------------------------

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]