Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

To: techdiver@opal.com
Subject: Re: Cyclon 300 regs
From: gregr@jo*.cs*.su*.OZ*.AU* (Greg Ryan)
Date: Mon, 8 Nov 1993 11:02:14 +1100
    From: Steve Mercer <mercer@fr*.ma*.go*.nz*>
    Subject: Cyclon 300 regs

    I have serviced these regs since 1979.  We used them exclusively until the
    Odin appeared.  I recently sold our old ones off for $50 each (Greg Ryan
    bought 4).

And I've been really happy with them (thanks Steve).  They took a bit
of loosening up, but now they're fine.  It also took me a few dives
to get used to the way they breathe.

    They are simple to service BUT, your dive shop has to have the special
    tools AND metric spanners.  The first stage is unbalanced but, with this
    type of diaphragm reg, inhalation effort decreases with the tank pressure. 
    The Cyclon 300 consistantly outperformed all of it's contemporaries and
    because it didn't change at all during it's production life, it's reported
to
    be the most popular reg in the world (on sales figures).

I notice too that Poseidon are now making the Cyclon 2nd stage in
bright yellow plastic, so I presume that parts will continue to be
available.  I also heard rumours that they were going to issue a 
limited edition gold plated version as part of some sort of anniversary
(for those of you with more money than sense!).

    Yes, we did have frequent free flows caused by the second stage piston
    seizing in it's housing.  Both are chrome plated brass and the clearance is
    too small IF corrosion occurs.  Usually this happens when a diver is
    getting back into diving after a few weeks or months break.  The reg free
    flows as the purge button is depressed. This is cured by turning off the
    valve and dunking the second stage in water to dissolve away the salt.  I've
    never known of a 300 to free flow during a dive.    

I've certainly never had this problem.  In fact until I worked on them
a little I found that they tended to stick off a bit and require a good
suck to get them moving.  This is no longer a problem.

				Greg Ryan	gregr@cs*.su*.oz*.au*

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]