--_=_=_=IMA.BOUNDARY.HTML_4998384=_=_=_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit John, I am a drysuit diver so this discussion is purely academic, although I have used twin 80's with additional weight. I'm not sure I entirely understand your response. Do you mean to say that the 1500 psi figure you quoted was your 50/50 bottle? If so, then you answered my first question. I am curious, though, what your typical runtimes are. You mentioned in a previous post that you like to keep your dives at about 200 fsw using a light trimix of 25% or less, with bottom times of 20-25 minutes. How much gas are you actually consuming for this? I am still waiting for an answer to the second question, namely how an eight pound belt balances a rig that has over 13 pounds of consumed gas, plus exposure suit compression. I trust you will be able to explain that with your usual eloquence. As for the ILS, start at 30 feet AGL at full throttle, then just close your eyes and use The Force... -Sean --Original Message Text--- From: Johnscha@ag*.co* Date: Thu, 6 Sep 2001 08:40:09 -0400 Naw, I'm actually looking at the 50/50 mix. First of all, you're not carrying enough mix in 80's without a serious and dangerous overfill and you still come up short compared to my 232bar 85's. And they are 232bar tanks, same material sold in Europe ! So at 3300-3500 psi I carry significantly more air. The trim is pretty good compared to the 98's that I use to dive. They sit higher, which helps me to stand up with my busted back. They also have a narrow profile for streamlining. Try them, you'll like em. Remember sonny, experience counts ! Sure you don't want to give me some advice on that ILS ? Now let me see if I have a post from your legal buddy. JWS -----Original Message----- From: Sean T. Stevenson [mailto:ststev@un*.co*] Sent: Wednesday, September 05, 2001 5:30 PM To: John Schachleiter; techdiver@aquanaut.com Subject: Re: AL 80's Still bitter about the oxygen deco explanation John? I would have thought that such comments from a "kid" such as myself wouldn't have bothered you, as you are obviously so much older, wiser and more experienced than myself. (Which raises the question, why do you even bother to post here, if you already know everything?) Having said that, I have a question or two regarding your post, cited below. You mention that you are neutral at 20 fsw with 1500-2000 psi remaining in your tanks. I am curious then, what happens in the hypothetical situation that your tanks are near empty and you have had to jettison your deco bottle. Conventional wisdom would lead one to believe that you would have excess positive buoyancy in this case, but I'm sure you can set us all straight on that. Please explain. Second, you mention that you wear an 8 lb weight belt, which implies that you are using a high helium content in your back gas, since the minimum amount of droppable weight you require is the weight of the consumed gas in your tanks. Assuming you were breathing air, with twin Faber 85's and no overfill this would be at least 13.5 pounds, and then you need to add weight to that to compensate for exposure suit compression, since you are wearing a neoprene suit, and need to be able to get up when the suit compresses. Are you diving on heliox? An eight pound belt doesn't intuitively seem to balance such a rig, but once again I will defer to your greater knowledge and experience to explain how this is possible. As I think from your post, but am not sure (see above questions), you understand the concept behind a balanced rig, namely, that you have enough weight to hold your shallowest stop with near empty tanks, while being able to swim up your rig from depth with full tanks and compressed exposure suit, by dropping something (your belt). You use an aluminum deco bottle, so you obviously understand why deco and stage bottles should be able to be jettisoned without affecting your weighting. I hope to be able to learn about balancing my rig from your responses to these questions. As for the AL80 issue, in addition to proper balancing (as I understand it), the 80's provide superior streamlining in a format that is easily accomodated on most boats and easy to move around, given their light weight. -Sean T. "the kid" Stevenson PS - Just for the record, I never took such a brute force approach as to kick the slats out of my crib. According to my mother, I undid all of the fasteners (which were wingnuts), and the crib collapsed on me in the middle of the night - I took to sleeping in a bed at a very young age. Cheers. --Original Message Text--- From: Johnscha@ag*.co* Date: Wed, 5 Sep 2001 14:27:31 -0400 AL 80's Jeez, I really should lay off, but I just can't help myself. I think ya'll are smoking dope on mandating AL 80's as " the only way " to dive, open ocean, in a wet suit. I've been using Faber double 85's with a shortly, farmer john, vest, AL40 deco bottle and 8lb weight belt for a while. I am about neutral on my 20' hang with 1500 - 2000 psi remaining in the tanks and a near empty BC. I will kiss your collective butts at payday muster if I can't swim this rig off the bottom any day of the week while safely carrying more gas ! No comments from Sean and his legal beagle buddy please. I suspect I was doing this stuff when he was kicking the slats out of his crib. Probably like to tell me how to shoot an ILS to minimums. --_=_=_=IMA.BOUNDARY.HTML_4998384=_=_=_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: 7bit <HTML> <FONT FACE="MS Sans Serif" DEFAULT="FACE"><FONT SIZE="1" POINTSIZE="8" DEFAULT="SIZE">John, I am a drysuit diver so this discussion is purely academic, although I have used twin 80's with additional weight. I'm not sure I entirely understand your response. Do you mean to say that the 1500 psi figure you quoted was your 50/50 bottle? If so, then you answered my first question. I am curious, though, what your typical runtimes are. You mentioned in a previous post that you like to keep your dives at about 200 fsw using a light trimix of 25% or less, with bottom times of 20-25 minutes. How much gas are you actually consuming for this?<BR> <BR> I am still waiting for an answer to the second question, namely how an eight pound belt balances a rig that has over 13 pounds of consumed gas, plus exposure suit compression. I trust you will be able to explain that with your usual eloquence.<BR> <FONT FACE="MS Sans Serif" DEFAULT="FACE"><BR> As for the ILS, start at 30 feet AGL at full throttle, then just close your eyes and use The Force...<BR> <BR> <FONT FACE="MS Sans Serif" DEFAULT="FACE">-Sean<BR> <BR> <BR> <BR> --Original Message Text---<BR> <B>From:</B> Johnscha@ag*.co*<BR> <B>Date:</B> Thu, 6 Sep 2001 08:40:09 -0400<BR> <BR> <FONT COLOR=0000ff><FONT FACE="Arial"><FONT SIZE="2" POINTSIZE="10">Naw, I'm actually looking at the 50/50 mix. First of all, you're not carrying enough mix in 80's without a serious and dangerous overfill and you still come up short compared to my <B>232bar </B>85's. And they are 232bar tanks, same material sold in Europe ! So at 3300-3500 psi I carry significantly more air. The trim is pretty good compared to the 98's that I use to dive. They sit higher, which helps me to stand up with my busted back. They also have a narrow profile for streamlining. Try them, you'll like em. Remember sonny, experience counts ! Sure you don't want to give me some advice on that ILS ? Now let me see if I have a post from your legal buddy.<FONT COLOR=000000 DEFAULT="COLOR"><FONT FACE="MS Sans Serif" DEFAULT="FACE"><FONT SIZE="1" POINTSIZE="8" DEFAULT="SIZE"><BR> <FONT COLOR=0000ff><FONT FACE="Arial"><FONT SIZE="2" POINTSIZE="10">JWS<FONT COLOR=000000 DEFAULT="COLOR"><FONT FACE="MS Sans Serif" DEFAULT="FACE"><FONT SIZE="1" POINTSIZE="8" DEFAULT="SIZE"><BR> <BR> <FONT FACE="Tahoma"><FONT SIZE="2" POINTSIZE="10">-----Original Message-----<BR> <B>From:</B> Sean T. Stevenson [mailto:ststev@un*.co*]<BR> <B>Sent:</B> Wednesday, September 05, 2001 5:30 PM<BR> <B>To:</B> John Schachleiter; techdiver@aquanaut.com<BR> <B>Subject:</B> Re: AL 80's<BR> <BR> <BR> <FONT FACE="MS Sans Serif" DEFAULT="FACE"><FONT SIZE="1" POINTSIZE="8" DEFAULT="SIZE">Still bitter about the oxygen deco explanation John? I would have thought that such comments from a "kid" such as myself wouldn't have bothered you, as you are obviously so much older, wiser and more experienced than myself. (Which raises the question, why do you even bother to post here, if you already know everything?)<BR> <BR> Having said that, I have a question or two regarding your post, cited below. You mention that you are neutral at 20 fsw with 1500-2000 psi remaining in your tanks. I am curious then, what happens in the hypothetical situation that your tanks are near empty and you have had to jettison your deco bottle. Conventional wisdom would lead one to believe that you would have excess positive buoyancy in this case, but I'm sure you can set us all straight on that. Please explain.<BR> <BR> Second, you mention that you wear an 8 lb weight belt, which implies that you are using a high helium content in your back gas, since the minimum amount of droppable weight you require is the weight of the consumed gas in your tanks. Assuming you were breathing air, with twin Faber 85's and no overfill this would be at least 13.5 pounds, and then you need to add weight to that to compensate for exposure suit compression, since you are wearing a neoprene suit, and need to be able to get up when the suit compresses. Are you diving on heliox? An eight pound belt doesn't intuitively seem to balance such a rig, but once again I will defer to your greater knowledge and experience to explain how this is possible.<BR> <BR> As I think from your post, but am not sure (see above questions), you understand the concept behind a balanced rig, namely, that you have enough weight to hold your shallowest stop with near empty tanks, while being able to swim up your rig from depth with full tanks and compressed exposure suit, by dropping something (your belt). You use an aluminum deco bottle, so you obviously understand why deco and stage bottles should be able to be jettisoned without affecting your weighting.<BR> <BR> I hope to be able to learn about balancing my rig from your responses to these questions. As for the AL80 issue, in addition to proper balancing (as I understand it), the 80's provide superior streamlining in a format that is easily accomodated on most boats and easy to move around, given their light weight.<BR> <BR> -Sean T. "the kid" Stevenson<BR> <BR> PS - Just for the record, I never took such a brute force approach as to kick the slats out of my crib. According to my mother, I undid all of the fasteners (which were wingnuts), and the crib collapsed on me in the middle of the night - I took to sleeping in a bed at a very young age.<BR> <BR> Cheers.<BR> <BR> <BR> --Original Message Text---<BR> <B>From:</B> Johnscha@ag*.co*<BR> <B>Date:</B> Wed, 5 Sep 2001 14:27:31 -0400<BR> <BR> AL 80's <BR> <BR> <BR> <FONT FACE="Arial"><FONT SIZE="2" POINTSIZE="10">Jeez, I really should lay off, but I just can't help myself. I think ya'll are smoking dope on mandating AL 80's as " the only way " to dive, open ocean, in a wet suit. I've been using Faber double 85's with a shortly, farmer john, vest, AL40 deco bottle and<B> 8lb weight belt</B> for a while. I am about neutral on my 20' hang with 1500 - 2000 psi remaining in the tanks and a near empty BC. I will kiss your collective butts at payday muster if I can't swim this rig off the bottom any day of the week while safely carrying more gas ! No comments from Sean and his legal beagle buddy please. I suspect I was doing this stuff when he was kicking the slats out of his crib. Probably like to tell me how to shoot an ILS to minimums. <FONT FACE="MS Sans Serif" DEFAULT="FACE"><FONT SIZE="1" POINTSIZE="8" DEFAULT="SIZE"><BR> <BR> <BR> <BR> <BR> </HTML> --_=_=_=IMA.BOUNDARY.HTML_4998384=_=_=_-- -- Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]