Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: David Shimell <David.Shimell@ta*.co*>
To: "'Davy'" <davydive@te*.co*.sg*>,
     "'Paul Braunbehrens'"
     ,
     "'Richie'" ,
     "'techdiver'" ,
     "'Christine M Yule'"
Subject: RE: Harness
Date: Thu, 10 May 2001 17:07:34 +0100
Paul

I managed it so it can't be that difficult.  Seriously, the thickness of the
webbing is the issue.  Jim has some pictures on his web page.

David Shimell

-----Original Message-----
From:	Davy [SMTP:davydive@te*.co*.sg*]
Sent:	Thursday, May 10, 2001 4:54 AM
To:	Paul Braunbehrens; Richie; techdiver; Christine M Yule
Subject:	Re: Harness

Hi guys,

I have changed my crotch straps on 2 of my old Halcyon BP( 1 inch slot) to
the new 2 inch "Shimellian style" soft webbing and don't find it really that
difficult. You might want to smoothen the sharp edges of the slot with file
and sand paper to allow easier passing through of the webbing and later
webbing wear protection. This is the best option in my opinion. Just my 2
cents.

Rgds,
Davy Koh

----- Original Message -----
From: Paul Braunbehrens <Bakalite@ba*.co*>
To: Richie <cheers2@op*.ne*>; techdiver <techdiver@aquanaut.com>;
Christine M Yule <cyule1@ny*.rr*.co*>
Sent: Thursday, May 03, 2001 11:22 PM
Subject: Re: Harness


> I have the OMS and I have a DIR syle harness.  There is no advantage
> to the OMS at all.  If you have an OMS harness, just take it off and
> use the instructions on the wkpp site to make a DIR harness.  It's
> pretty easy.  Or you can buy one from EE.  The only difficulty will
> be the crotch strap.  If you go with a 1 inch strap you can make a
> DIR style one and install it without any hassles, otherwise you have
> 3 options:
>
> 1) alter the plate to widen the slot to 2"
> 2) use a bolt and washers to hold the strap to the 1" slot (I've done
> this and it works)
> 3) fold the strap and pass it through the 1" slot.  (this is on my
> list.  apparently it requires pliers, wetting, possibly fabric
> softener, and a dictionary of curse words to get it through.)
>
> Cheers.
>
> PS.  Some might say that it's nice to have a quick release on the
> crotch strap.  This is also not an advantage.  With the quick
> release, part of the strap needs be on the belt side (the part with
> the loop and the female half of the buckle).  This makes the other
> part of the crotch strap shorter, by quite a bit.  Now when you try
> to find it while suiting up, you need to reach much further back, and
> it's generally harder to locate.  When you take the rig off, a DIR
> rig will allow you to simply undo the buckle and slide it out of the
> other part of the waist strap and the crotch strap in one motion.
> The OMS style requires the additional step of opening a quick
> release.  Unnecessary convolutions, added failure points, why bother?
>
>
> Richie wrote:
> ~
> >The Harness from OMS is too cluttered. I would rather have it
> >simple. That makes it easier for me to get it on and off. It also
> >makes it easier to
> >find the items I clipped on. The buckle is nice, and I will take
> >your word for it that it is strong, but it is not necessary.
> >   As far as the crotch strap goes, maybe the scooter can't break it.
> >But I don't want the scooter jamming it up my rear. The two inch
> >strap will
> >spread out the load and avoid binding. As far as the slot in the ss
> >plate goes. It is amazing what you can accomplish with drills and
> >files and
> >dremels.
> >     Oms simply did not do its homework on the harness. The chest
> >strap is in the way of the dry suit inflator. It is also not
> >necessary. The rings that hold the unit together , one on each side
> >are also not necessary.
> >Then there is the matter of the two inch strap that is attached to
> >the ring with one inch webbing.I want two inch.
> >Their one inch crotch strap has this small plastic clip on it to
> >make it adjustable. I would rather have it solid with a loop.
> >It seems to make sense to Keep it simple and very functional. It's
> >my opinion and how I intend to proceed and why.
> >Thanks for the info, even though I did not agree with it.\
> >Richie
>
>
> --
> Paul B.
> --
> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]