Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Date: Sun, 29 Apr 2001 19:40:25 -0700
From: Paul Braunbehrens <Bakalite@ba*.co*>
Subject: Re:Source
To: Richie <cheers2@op*.ne*>, techdiver@aquanaut.com
Richie, just get the webbing from Halcyon, duh! ;-)

You can also get the crotch strap from them, but then you'll have a 
problem installing it if you got with 2 inch.  The OMS backplate has 
a 1 inch slot.  There is an easy solution.  Simply use a bolt to 
attach the crotch strap, like you normally would with a nylock nut 
and a short bolt.  Get the biggest bolt that will fit through the 1 
inch slot, position it in the center and voil=E0!  If you tighten it 
down it won't move around, and you didn't even have to drill a hole.

I used regular webbing for the crotch strap, and it's a bit stiff. 
Doesn't bother me, but if you want the real deal go for halcyon 
webbing on that one too.

BTW, I kind of regret having put my own harness together.  First I 
used standard webbing from a dive store, which was too stiff, then I 
did it again with webbing from Halcyon, which is much nicer, but then 
I saw a friend with a Halcyon harness, and all the D-rings are 
prebent, and the whole thing just looks slick.  As usual, I could 
have saved some money by just buying the damn Halcyon setup to begin 
with.

Cheers.


Richie wrote:
~
>
>
>Hopefully, you have an answer. I recently got an OMS backplate 
>assembly with the clips and dips. I need a source of quality 
>webbing(2" ) to reconfig the plate to DIR specs. Is the webbing a 
>certain tensile strength? Does it have a specific name. I have all 
>the d rings and buckle, so I don't need a set from Halycon.
>      I am in New York.  the DIW    (  ie Doing it wrong see Capt 
>Zero "magazine Strokes" in archives.)  area. It is not easy to get 
>the stuff at the dive shops.
>  Also, I would be interested to hear what size for the crotch strap 
>you are using.  The backplate currently has a one inch crotch strap.
>Thanks,
>Richie
>ps My bladder is not bungee or techcord.
>Got this out, and not a flamethrower in sight.


-- 
Paul B.
--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]