Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

Date: Thu, 08 Jun 2000 12:31:18 +0200
From: Marcin Piekarski <piekars@in*.co*.pl*>
Organization: INSTALPOL
To: Manos Manoli <manos@ma*.co*.cy*>
CC: Techdiver <techdiver@aquanaut.com>
Subject: Re: Manifold etc.
Manos, thanks for offer, you are very helpful indeed. Right now I'm
coresponding with this firm in italy indicated by Steve Danaher. 
But if I had any problems with getting this manifold, then I shall ask
you for help, OK.

Thanks again.

Best regrads
Marcin

Manos Manoli wrote:
> 
> Scubapro manufactures 2 diferent length manifolts you obvious have the
> short one i have my twin 15Liters with scubapro valves and manifolt
> and there are no threats left over on the valve.
> 
> If you want i can come back with the part number of my manifold or even send
> you one.
> ( Mind that in the Usa they do not use M/25/2 threats on thair
>    valves they have the 3/4" so do not order a complete valve and
>    manifold unless you specify your valve threats )
> 
> Another posibility is that you have the wrong Bands that keep your tanks
> appart!
> 
> Manos Manoli
> Limassol- Cyprus
> 
> Marcin Piekarski wrote:
> 
> > Hello group.
> > This time I'm completing next set of my doubles, previous one that I own
> > was pre assembled in factory. This time I've got such a question.
> > I want to pair two 15 or 18 liters tanks, (ca.110 and 130 cf) but
> > standard manifold from Scubapro - which is the easiest to buy in Poland,
> > has only about 18-19 cm space between tank axes. It means that I can use
> > it on tanks that are no bigger than 18 cm in diameter, each.
> >
> > Standard 15 liters tank has 20,3 mm and 18 liters - ca. 213 mm. It means
> > that this two types are excluded.
> >
> > Are you using bigger manifolds, from other manufacturers, with this kind
> > of tanks or are you buying thinner - longer tanks that would fit this
> > particular manifold.
> >
> > Marcin
> >
> > --
> > Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> > Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]