Mailing List Archive Mailing List Archive
Scubapro manufactures 2 diferent length manifolts you obvious have the short one i have my twin 15Liters with scubapro valves and manifolt and there are no threats left over on the valve. If you want i can come back with the part number of my manifold or even send you one. ( Mind that in the Usa they do not use M/25/2 threats on thair �� valves they have the 3/4" so do not order a complete valve and �� manifold unless you specify your valve threats ) Another posibility is that you have the wrong Bands that keep your tanks appart! Manos Manoli Limassol- Cyprus Marcin Piekarski wrote: > Hello group. > This time I'm completing next set of my doubles, previous one that I own > was pre assembled in factory. This time I've got such a question. > I want to pair two 15 or 18 liters tanks, (ca.110 and 130 cf) but > standard manifold from Scubapro - which is the easiest to buy in Poland, > has only about 18-19 cm space between tank axes. It means that I can use > it on tanks that are no bigger than 18 cm in diameter, each. > > Standard 15 liters tank has 20,3 mm and 18 liters - ca. 213 mm. It means > that this two types are excluded. > > Are you using bigger manifolds, from other manufacturers, with this kind > of tanks or are you buying thinner - longer tanks that would fit this > particular manifold. > > Marcin > > -- > Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. > Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'. -- Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]