Joel, I must have missed something: why would one want to take something
like this diving with them? I can assure you that anything that would be
this much of an issue would never be in the water with me, since I have
no time for bullhsit. I could use the big von method and take an armfull
of them, but why? I remember Deans dicking around with this crap - it
really pissed me off to sit there while he had to screw around with
these things. 

Real presure guage, real bottom timer are the only guages. The rest does
not belong in the water, and is never found on anyone doing anything
serious ( and getting it done), and that is no coincidence.

Joel Silverstein wrote:
> 
> Billy Deans has used the Nem II and IIa for years, I have used them for
> years ( i have 4 of them now). Granted some early units had problems, and i
> had my share of them early one, as have all computers, but these units work
> quite well. My units have been without problems for over 3 years now once I
> understood the voltage issue. They eat batteries due to the large amount of
> data they record but thats not an issue. As long as the voltage is kept at
> 6.0 v its fine -- when the voltage drops due to leaving the unit on for 2
> days then you will have a problem. We solved the problem by checking the
> battery voltage on each power up if its less than 6.0 v we change the
> batteries ------ the new unit the Gemeni has solved the battery issue, but
> i have not seen that one yet.
> 
> The data recorder is quite a useful tool for teaching and analyzing dives.
> 
> Like with all tools they do take a little time to understand their
> intricacies.
> 
> Regards,
> 
> JDS
> 
> At 05:34 PM 11/29/99 -0800, tgunther@co*.co* wrote:
> >List:
> >
> >I have a Nemiss II+ (as a data logger) and it has worked without fault for a
> >year.     I also know many instructors whose Nemesis's have worked for years
> >without a hitch.    Perhaps this "Cochrans all suck" should be added to the
> >Urban Legends website as often smoke and usually mirrors?
> >
> >Tod
> >
> >
> >--
> >Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> >Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
> >
> 
> --
> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]