Mailing List Archive Mailing List Archive
Sean Do you have the address of the website where you found the plans for the analyser. Thanks in advance Dan > -----Original Message----- > From: Sean Cary [SMTP:SMCARY@MI*.CO*] > Sent: 23 March 1999 20:49 > To: Osmond, Paul [SKPK:1T41:EXCH]; techdiver > Subject: Re: Oxygen Cleaning? > > It's Low Pressure...don't even worry about it. > > The only fear of O2 is HP uses. That and running deco to 1.9 like the > USDCT > did. But you'd have to be pretty stupid to do that, and you were smart > enough to ask about this...so that leaves that out. :-) > > Sean > > ----- Original Message ----- > From: Paul Osmond <paul@no*.co*> > To: <techdiver@aquanaut.com> > Sent: Tuesday, March 23, 1999 2:28 PM > Subject: Oxygen Cleaning? > > > > I recently built an oxygen analyser from a set of plans available on > > the WEB. It works great! > > > > However, I will need to run high O2 percentages though a BC inflator, > > needle valve, tubbing, T-Barb hose connectors, etc to be able to > > test my nitrox deco gas. My reg is oxygen clean, but not the > > needle valve, connectors, etc and I would like to clean them myself. > > > > I have read on the WEB that it is easy to oxygen clean stuff using > > "Simple Green" or "409" degreasers/cleaners but they do not give > > you any details other than that. So can any of you do-it-yourself'ers > > give me the best way to oxygen clean the above items? > > > > Stuff like: > > > > - Amount of cleaner to water percentages. > > - Should the water be hot or cold. > > - At the moment I have access to "Simple Green" and I have noticed > > there are at least 3 different varieties, which one is best? > > - Lime and decalcifier. > > - House hold degreaser. > > - Automotive degreaser. > > - How long should you soak the items. > > - Any other steps or caveats I may have missed or am not aware of. > > > > Any info you can pass along would be great. > > > > > > Thanx in adavance. > > -- > > Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. > > Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'. > > -- > Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. > Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'. -- Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]