Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: <RLucas1013@ao*.co*>
Date: Tue, 16 Mar 1999 07:25:50 EST
To: BillWolk@ea*.ne*, techdiver@aquanaut.com
Subject: Re: Weight belts and backplates
 pparently people have decided to abandon newtonian physics. 
>  
>  You do not need any weight when properly configured 104's et al.
>  IA
>  Do it all the time, works great, wouldn't have it any other way.
>   n a message dated 3/15/99 11:53:29 PM EST, kevin@nw*.co* writes:
> 
> << 
>  >>
> snip Volk
> Right now, I'm diving in South Florida in a 6 mil wetsuit, manifolded 
> AL80s with an 8# v-weight and a stainless steel backplate (-14# total) 
> and an extra 2lbs around my waist for trim. With full tanks at the 
> beginning of a dive, BC completely empty, in the sand at 115', and 
> wearing Scubapro Jetfins, I can swim this rig to the surface.  
> Right now, I'm diving in South Florida in a 6 mil wetsuit, manifolded 
> AL80s with an 8# v-weight and a stainless steel backplate (-14# total) 
> and an extra 2lbs around my waist for trim. With full tanks at the 
> beginning of a dive, BC completely empty, in the sand at 115', and 
> wearing Scubapro Jetfins, I can swim this rig to the surface.  
> 

> Bill,
> Wouldn't the 104's be a better option with an alum back plate?.The cave
manual
> has them listed as close to -3# each? I haven't tried it but some have said
> they could not swim up 104's ? Your diving  aluminum 80's with an 8# V-
weight,
> -14# back plate and a -6# canister light if your really diving the system. I
> would think the 104's and an alum back plate with no weight my be better for
> me, since I am not as physically fit as you. At depth you have compressed
your
> wet suit almost nil and have to swim up an - 8# V weight, 14 back plate 6#
> canister light and extra-2 # for trim. Really seems like a lot of weight to
> start an accent from 180' with a BC failure and a compressed wet suit. I
think kevin
may have the sweeter system.   
> BOB

--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]