Yes, I also had a suggestion that you weld a round disk at the ends of 
the pegs to accomplish the same goal, and would probably be easier than a 
bend. But there is something even easier, non-skid tape or paint work 
just as well. So picture in your mind non-skid on my DIR fin ladder.

 jim

Sender: George P. Wentland  Date: 10/24/98 1:13 AM

>I have one improvement, on the diagram you show straight pegs. If the pegs
>curved slightly upward on the ends it would help prevent the finned foot
>from sliding off the side of the ladder when the boat is rocking. Lets DIR!!
>
>> -----Original Message-----
>> From: Jim Cobb [mailto:cobber@ci*.co*]
>> Sent: Wednesday, October 21, 1998 5:21 PM
>> To: Tech Diver
>> Subject: Fin ladder
>>
>>
>> All-
>>
>> I've had a couple of questions as to what a fin ladder looks like so I
>> whipped up a graphic to show what I consider to be a proper DIR ladder.
>>
>> http://www.cisatlantic.com/trimix/pegladder.htm
>>
>>
>>  Jim
>>
>>  -------------------------------------------------------------------
>>  Learn About Trimix at http://www.cisatlantic.com/trimix/trimix.html
>>
>>
>> --
>> Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
>> Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
>>
>
>


 -------------------------------------------------------------------
 Learn About Trimix at http://www.cisatlantic.com/trimix/trimix.html


--
Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'.
Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]