Mailing List Archive Mailing List Archive
Underwater Applications Corp has a number of overstocked and discontinued= items to move out. Many of these items we used to sell a long time ago or= items used as components in systems and not normally sold individually. These products are available to anyone (the buyer does not have to be a dive store). Equipment is new unless specified otherwise. Computer Controlled Mixing panel. NS Research ANX Supreme. 1 inlet for oxygen, 1 inlet for air, with fill whip. Described on first page of catalog. I can supply a complete nitrox system with this panel and oxygen= compatible filter system, interconnect components, etc. Regular panel pri= ce $4590. 1 available, price on request. Gas Mixing Panel, U-PNL-TX1. This is the trimix module that goes with the= Gas Mixing and Distribution Station Nitrox Base Panel. It is suitable for= dive stores that already have a nitrox mixing panel (preferably Underwate= r Applications Part # U-PNL-BSE) and want to add capability to control a helium bank, argon bank, and a mixed-gas (could be nitrox, trimix, etc) storage bank system. Regular Price: $1495, Sell: $1300, 1 available Regulators (not for scuba diving): Regulator, small brass industrial type, 3,000 psi inlet, adjustable 0-200= psi outlet. Two inlet ports, two outlet ports. Good for analyzer flow sampling or scuba test setups. 1 available $30 Regulator, Tescom 25-1033-24-007. 4,000 psi inlet, adjustable 0-4,000 psi= outlet. Panel mount. Good for Air fill panels, etc. Used/Surplus. 1 available $100 Regulator, Aqua Environment AE-415A-400. 6,000 psi inlet, adjustable 0-40= 0 psi outlet. Sometimes used for surface supplied oxygen systems or surface= supplied diving operations. List: $265.00, 1 available at $200. Flow Fuse, Aqua Environment AE-443. Place in line before fill whip block.= If a fill whip blows, this device detects high flow and shuts down the ga= s supply, preventing the broken hose from flying around. A trickle of gas will still continue, so that when the system is repaired, the system will= automatically repressurize and the flow fuse will re-open. List $34. 1 available at $28. Relief Valve, Aqua Enviroment AE-504. High pressure relief valve, adjustable from 0 to 6,000 psi vent pressure. 1 or 2 available, List: $64= , Sell $52. Stainless Steel Braid Hose, 12" long, 1/4 NPT Female one end, Male at the= other. Normally used for joining industrial gas cylinders. I can set the= se up for oxygen or helium cascade as well (extra $ for required parts to do= this). List $21. 6 available at $17 each Stainless Steel Braid Hose, 24" long, 1/4 NPT Female both ends, same stor= y as above. List $20. 3 available at $17 each. Brass fittings. #6 JIC (for 3/8" flared tubing) and #4 JIC (for 1/4" flar= ed tubing or air station "swivel" hose ends). Rated for 3,000 psi dynamic or= 4,000 psi static pressure. Acceptable for oxygen service. 1/2 Parker list= price. Call with your specific needs and for pricing. Quick Disconnects. High Pressure (5,000 psi rated) steel. Shutoff on both= socket and plug. Screw together - can be connected/disconnected while ful= ly pressurized. Socket connection has Male pipe thread, plug has female pipe= thread. 2 sets available, $30 each. Needle Valve, Stainless Steel, 6,000psi rated. Because the handwheel is a= small (3/4" dia) knurled knob which is difficult to turn, this valve is best used in applications where the opening would not change often. Previously installed in a system, but unused. 1 available, $30 Panel Blank for U-PNL-BSE. 22"h x 20"w x 6"d, 0.090" thick aluminum. Has = 5 2-1/2" gauge cutouts, 4 Sherwood line valve cutouts, and 2 4-1/2" gauge cutouts. Multiple 7/16" holes accross the top face for bulkhead fittings,= 7/16" and 3/4" holes along the bottom face for bulkhead fittings and manifold ports. Left and right sides are open. Painted flat black inside and out. Normally not sold, but for customers who wish to make their own panels. Drawing available upon request. 3 available. $200 each. Panel Blank for U-PNL-TX2. 22"h x 13"w x 6"d, 0.090" thick aluminum. Has = 4 2-1/2" gauge cutouts, and 4 Sherwood line valve cutouts. Multiple 7/16" a= nd 3/4" holes top and bottom for bulkhead/manifold mounting. Left and right sides are open. Painted flat black inside and out. Normally not sold, but= for customers who wish to make their own panels. Drawing available upon request. 8 available.$100 each. Adapter Plates for Panel Blanks: U-PNL-BLK-04: Allows a Sherwood Line val= ve to be mounted in a 2-1/2" gauge cutout. Painted flat black. 20 available = at $10 each. U-PNL-BLK-06. Allows digital pressure gauge to be mounted in 4-1/2" gauge cutout. Unpainted (but can be painted at additional cost). 2= -4 available at $35 each. U-PNL-BLK-07. Allows AE-415 Regulator to be placed= in a 4-1/2" gauge cutout. Unpainted, but can be painted at additional cos= t. 2-4 available. $35 each. Catalyst Research Mounting Bracket for Mini-Ox Series, CR-474664, adjustable mounting bracket for Mini-Ox Unit. List $45, Sell $25, 1 available Payment Terms: Must be Prepaid by Check (1 week to clear) or VISA/MC. Warranty applies, 10 day no hassle return, except for special orders/customizations. Shipping not included. Contact: C. Randy Bohrer Underwater Applications Corp 15 Brewster Rd Framingham, MA 01702-6217 tel: (508) 628-9520 fax: (508) 820-3337 -- Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]