Art, so am I. ;) ---------- From: Paltz, Art Sent: Tuesday, September 30, 1997 10:18 AM To: 'Carlos Accioly'; s_lindblom@mo*.co*.co*; techdiver@aquanaut.com Subject: RE: PP Nitrox Mixing in Doubles Carlos, I'm talking about turning the upside down (180 degrees from the way they are usually filled). This would have gravity hold the gas down hence it will enter the tank slower. This would create less heat as the tank is filling slower. Hence less heat, less wear and teat on components... P.S. I'm being sarcastic (full of B.S.) Safe diving, Art. art.paltz@r2*.co* Last Dive 9/27/97, The Pinta, NJ, 76ft/50 min bottom time, 67 degrees F, 28% bottom mix -----Original Message----- From: Carlos Accioly Sent: Tuesday, September 30, 1997 8:47 AM To: s_lindblom@mo*.co*.co*; techdiver@aquanaut.com; Paltz, Art Subject: RE: PP Nitrox Mixing in Doubles Art, Isn't 180 degrees too hot? Dive safe, Carlos Accioly ---------- From: Paltz, Art Sent: Monday, September 29, 1997 10:11 PM To: s_lindblom@mo*.co*.co*; techdiver@aquanaut.com Subject: RE: PP Nitrox Mixing in Doubles If you turn the tanks upside down then the fill is slower and there is less heat build-up!! I think filling upside down is better since with less heat there is less wear and tear on the valve and tank. Now you only need to get them O2 cleaned every 13 months. Well worth making a complete ass out of yourself by demanding "180 degree" fills!! Safe diving, Art. art.paltz@r2*.co* Last Dive 9/27/97, The Pinta, NJ, 76ft/50 min bottom time, 67 degrees F, 28% bottom mix -----Original Message----- From: armantrout@wo*.at*.ne* Sent: Monday, September 29, 1997 11:27 AM To: s_lindblom@co*.co*; techdiver@aquanaut.com Subject: Re: PP Nitrox Mixing in Doubles >This is absolutely correct. Also, you need to lie the doubles down on their >side. If they are standing up, gravity will pull the gas thru the valves at >too fast of a rate thereby causing additional heat buildup. This can be >offset to some degree if the moon is full, as the gravitational pull of the >moon will have an upward pull on the gas thereby providing some reduction in >friction and hence cooling the stream. > >This stuff is serious. Make sure you go only to trained professionals! > >Trout > -- Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'. -- Send mail for the `techdiver' mailing list to `techdiver@aquanaut.com'. Send subscribe/unsubscribe requests to `techdiver-request@aquanaut.com'.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]