Mailing List Archive Mailing List Archive
Hi Egil,
I am from Kingston also and dive the year round here. As the water gets =
colder I just move farther up the river. In order to suggest an optimum =
set up for you, what is your current tank(s) setup?
I have dual LP 95's w/ an isoloated Sherwood manifold. I use Posiden =
first stages, one Jetstream(backup) and an Aga FFM (primary) this time =
of year. Because of the way the Aga's reg feeds from the left, I attach =
it to the first stage on the left post. The Jetstream on the long hose =
goes on the right post. I have all the hoses on both first stages =
attached so they point down ward. The short hose on the FFM goes over my =
left shoulder and the long hose (7') goes down behind my right shoulder, =
just underneath my waist mounted Spectrum 14 light, diagonally across =
the front of my body from right to the left side of my neck and around =
so that it hangs by the right side of my neck, where I have never had a =
problem with it dislodging or being in the way. Some people prefer to =
carry their spare mask in a pouch on the waist, but I like to wear mine =
reversed around my neck.
I hope this was of some help.
Dan
----------
From: Egil Aabel Naesguthe[SMTP:egil@me*.qu*.ca*]
Sent: Wednesday, November 13, 1996 1:20 PM
To: Techdiver
Subject: What hoses with a Full Face Mask?
Hi,
It's getting cold in the water up here, and it's time for the full face
mask (I'm using a Cressi-sub). So I'm wondering if some of you cold =
water
divers have some thoughts on what a good set up should look like. It
would be nice to include the long hose somehow (on the back up reg?), =
but
I don't quite see how it can be done without stuffing it in the process!
Where do you place the back up reg, how is it attached, and how long is
the hose on it?
Thanks in advance.=20
Egil.=20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Egil Aabel Naesguthe
Queen's University E-mail: egil@me*.qu*.ca*
Dept. of Mechanical Engineering
Kingston, ON Phone: +1 613-545 6730
K7L 3N6
Canada Fax: +1 613-545 6489
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
--
Send mail for the `techdiver' mailing list to `techdiver@terra.net'.
Send subscription/archive requests to `techdiver-request@terra.net'.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]