Your Comments: When I dived one, I found I was causing an open circuit effect, as the variable volume was insufficient for my lung capacity. Reply: When I first started diving the unit, I found similar problems. It was not a problem with the unit but the way I set it up. The BCD design has a set of tear away covers over the counter lung. When setting up the unit, you have a natural tendency to pull these cover tight. This in fact causes a slight reduction in the over all shell space for the counter lung and consequently prevents the counter lung from expanding fully. For most divers, this does not cause a problem as the volume is still sufficient. However, like you, I would over breathe the bag. I found that by increasing the resistance on the dump valve and by not tightening the tear away flaps over the counter lung the problem was resolved.
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]