Mailing List Archive

Mailing List: techdiver

Banner Advert

Message Display

From: <JimH720113@ao*.co*>
Date: Mon, 26 Aug 1996 20:07:46 -0400
To: jjackson@mh*.sb*.co*
cc: techdiver@terra.net
Subject: Re: Pony-bottle rigging
I have been diving the great lakes for >20 years. For the diving done here on
a regular
basis, it seems ponies are the rule,,,,not the exception...if you are diving
greater than
250' deep a whole new config. is needed,,,but for the average wreck dive 200'
for 20/25
min. in water <38 deg. a pony fill the bill.. I use only 30cu.ft pony filled
to 3,300 so there is a bit more than 30. the isolator valve with two regs. is
fine except most people can not get to the valves because of the dry suit and
the underwear necessary for the somewhat cool waters. i have found that a 120
cf. main,,,,with a 30 cf pony is about right for nice easy diving to 200+
with a margin of safety......but then again this is MHO,,,,,,,,
so flame away all

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]