This is a multi-part message in MIME format. ------=_NextPart_000_012E_01BE8814.180BC2E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Robert =20 The MOD only does not specify the mix =20 The MOD is visible to the buddy but not as apparent to the diver, as it = runs length wise down the cylinder =20 The IANTD labels per standards going into effect 1 May all of this is = listed in the standards I posted with the original response to Bill IANTD labeling Has a type gas identifier these include Oxygen, Nitrox, Deco Gas and = Breathing gases other than air . With the exception of the Nitrox label = all of these state mix and MOD. When the Nitrox label is used a separate = MOD is recorded =20 2. A tape label is affixed to the neck of the cylinder so the diver can = read it, this tape is for the diver to be able to glance down and see = as well as visible with the bottle upright when stowed on a boat =20 3. We have labels now that run length on the cylinders with MOD in large = letters, some of these labels have a fixed MOD, some allow the diver to = write in the MOD A. We allow the cylinder to be painted with MOD should the diver = prefer=20 =20 4. A protective device is worn over the mouthpiece of the hottest mix. =20 In training our mixtures and tables are not the same as used by WKPP and = there is no reason why they should be. =20 We do have fixed MOD labels for the depths we use on our tables and the = mixes we use.We have MOD labels that may be filled in for other mixtures =20 So the fact that we label MOD with a blue label instead of paint makes = ours less safe than yours , you must be kidding. =20 The fact that we do multifaceted methods of ensuring the diver knows = both mix and MOD is less safe than what you advocate again where is the = logic in that =20 The fact that we require a protective device over the mouthpiece is less = safe than your single MOD painted cylinder You really must be kidding = Robert =20 We have multi indications of both mix and MOD and you have only one and = you argue that ours is less safe, repeat that to yourself and see just = how humorous it sounds. =20 You argue what a lawyer will say guess what I bet you will find your = system, that list only MOD and only on the side of a cylinder, far more = at risk from a legal perspective in event of an accident than ours.=20 =20 =20 As you know all standards we now produce are sent for legal review prior = to being presented.=20 We are more than confident that with the minor modification /additions = this year that our labeling and cylinder identification is by far the = safest to be found. =20 =20 Now whatever I state you guys will argue over (even if I were to say Hi = Guys somehow it would be offensive to you, and I really do not care , I = do care about diver safety just as our entire BOA and licensees do and = that is how we structure our programs.=20 There is no need for me to continue in this discussion so please remove = me from the CC list. I have replied to the original post by Bill and I = have addressed your opinion about the single MOD Vs our method of = listing MOD, mix, and gas identifiers. =20 You will continue your process we will do what we feel is much safer = than just a MOD without a current mix labeled on it. You trust the diver = to always have an identical mix we assume they may not thus mix and MOD = are required and will continue to be so.=20 Robert if you truly believe that MOD painted on the cylinder is all = that is needed why is it that when I have dived from your facility you = guys have taken tape and wrote mix on it Seems like you also wish to = verify both from your own facility. When you do that your system really = is not much different. =20 Have fun, be safe and go diving Respectfully yours, Tom Mount CEO IANTD World HQ http://www.iantd.com -----Original Message----- From: Robert M. Carmichael <halcyon@ha*.ne*> To: Bill Mee <wwm@sa*.ne*>; Tom Mount = <TOM.MOUNT@wo*.at*.ne*>; cavers@cavers.com <cavers@cavers.com> Cc: kirvine@sa*.ne* <kirvine@sa*.ne*>; "John R. Rose" = <rose@cs*.sc*.ed*>; "Jesse Armantrout" <armantrout@wo*.at*.ne*>; = "John Grogan" <john@ro*.co*.uk*>; "Chris Elmore" = <elmorec@ga*.cl*.sc*.ed*>; Ken Sallot <sallot@mi*.co*>; Jeff = Bentley <jeffbentley@mi*.co*> Date: Thursday, April 15, 1999 10:02 PM Subject: RE: labeling reply to Bill Mee (TANK MARKING) =20 =20 Tom, =20 MOD labeling is the only identification that makes complete sense. = MOD labeling is clear, direct, and demands only the absolute minimum = in-water interpretation by the diver for safe in-water use. Your method = may have been the best when it stood alone as the only standardized = system, but is clearly flawed. =20 After George and I recovered Jane Ornsteins body an opined that your = bottle marking was a major factor in her consumption of 900 psi of = =93DECO gas=94 (80/20 nitrox) from 130~up, I thought you would = =93advance safety=94 once again. =20 I will listen to you argue the =93extra bottles required for the MOD = method=94 providing you use a notepad or perhaps a calculator. You will = arrive at the simple conclusion of the same amount of bottles, = regardless. It is as simple as 1 bottle for O2 (see baker=92s dozen on = 80/20), 1 bottle for 50% (70=92), and another for 35%~ (120=92). The = 120 MODottles also act as our standard single tank ocean dive bottles. = We use the 190 bottles for our hyperoxic trimix dives beyond 100=92 as = well as for deco. Since you do not see a need for 190 deco, this leaves = you with a total need of 3 tanks dedicated to either DECO, single = tanking, or shallow RB drive gas. How can you cut down on the number of = bottles to do all your dives; basic, advanced, training or exploration? =20 =93DECO GAS=94 (80/20) / =91NITROX=94 (21%-50%) marking leaves much = to interpretation while requiring calculation for determination of what = should have been on the bottle to start with, the only info needed-MOD = (core, root, etc).=20 =20 Visible by all members from afar, is yet another luxury/benefit = afforded by the most simple of systems-MOD. When we found Jane in 260=92 = of water, it was very difficult to tell the difference in gases (one on = the left had 3000 psi of =93nitrox=94 while the one on her right had = 2100psi of =93deco mix=94. I suppose the lawyers will also have a field = day given the fact that both =93NITROX=94 and =93DECO=94 are not spelled = with the letter =93O=94, instead they have your circular LOGO. I can = hear the plaintiff=92s counsel suggesting that you where more concerned = about name recognition when INFORMATION exchange should have been the = only goal. Apparently the other diver=92s in Jane=92s class (in 300=92 = of water) did not take note that she was on =93DECO mix=94 for the 25 = minute period ascending to the 30=92 gas switch. I stand by my argument = that MOD shouts louder and provides instant information than an = ambiguous collage of a decal with a logo in the middle. I can see = exactly what gas my team member=92s are on without having to remind = myself that I am looking at the opposite of what I am meant to be = thinking (Jane=92s right was Dereck=92s left). TASK LOADING brings out = the weaknesses in human factor compatibility, to the intelligent diver = this means going to the core root of the problem and choosing = SIMPLICITY. =20 If a simple system works on massive dives, basic dives, in all = languages, with any diver, without calculation and is less expensive, = why then is it not for =93training=94? =20 We can start a fund raiser to retire the excess decal=92s and help = re-write that section of your manuals (save trees) if it would help, do = I hear a second on this? If you accept simply acknowledge so by cross = posting this note over to techdiver and the other various related sites = where =93safety advances=94 via information exchange can be implemented = immediately.=20 =20 RMC =20 age----- From: Bill Mee [mailto:wwm@sa*.ne*] Sent: Thursday, April 15, 1999 5:35 PM To: Tom Mount; cavers@cavers.com Cc: kirvine@sa*.ne*; "John R. Rose"; "Jesse Armantrout"; "John = Grogan"; "Chris Elmore"; Ken Sallot; Jeff Bentley Subject: Re: labeling reply to Bill Mee =20 Tom, =20 What is with you? No where in these standards can I find a mandate = to paint 3" MOD numbers on both sides of the tanks. This system is so = simple and so effective as to be almost self evident. Everyone = understands the perfectly clear and sensible rationale for doing this. = Why can't you simply place this requirement at or near the beginning of = your list? =20 As for the student who unfortunately breathed the unmarked = unanalyzed gas. This gas was described as "air" and was his "bailout". = May I have the temerity to ask whose idea was it to bail out to "air". = Was this the student's or Gurr's? Under the stressful conditions which = might precipitate the need to bailout it would seem to me to be the last = gas one would want to switch over to in a crisis situation. We all = remember what happened to Rob Parker when he switched over to air deep = and I am sure that Abner Chowdry remembers what happens under these = circumstances all too well. =20 Best regards, =20 Bill -----Original Message----- From: Tom Mount <TOM.MOUNT@wo*.at*.ne*> To: cavers@cavers.com <cavers@cavers.com> Date: Tuesday, April 13, 1999 3:55 PM Subject: labeling reply to Bill Mee Bill What is with you. We do not allow as you accuse.=20 some idiot filled a cylinder labeled as air with a hot mix and left = the air label on it. The diver had been using the same air cylinder all = week as a bailout cylinder and had no reason to think someone would fill = it with a hot mix. =20 If you dived a cylinder yesterday that had air in it and was labeled = air and you left it at for instance at Brownies dive shop would you = suspect overnight someone had changed the mix? =20 As per IANTD mixing standards=20 LABELING BOTTOM MIX EANx MIXTURES WITH LESS THAN 41% OXYGEN 1. Where applicable cylinders must be marked per legal = requirements in addition to the below=20 2. Cylinders painted yellow must be labeled with a 4 inches (10 = centimeters) green band. The band must wrap around the tank starting at = the flat of the cylinder. The label must state "Enriched Air Nitrox" (or = an applicable acronym). IANTD has EANx decals available for labeling = tanks.=20 1. Cylinders painted with colors other than yellow require a 6 = inches (15 centimeter) Enriched Air Nitrox band (decal) with the top 1 = inch (2.5 centimeters) and the bottom 1 inch (2.5 centimeters) yellow. = The middle of the band (decal) should be printed with a green background = and the message, "Enriched Air Nitrox" (or an applicable acronym) = printed in yellow for easy identification.=20 2. Nitrox (EANx) cylinders must have Cylinder Contents Labels = affixed to them. The Contents label must state the oxygen percentage = currently in the cylinder and the Maximum Operating Depth (MOD). The = label must be dated and signed by the person who purchased (or = requested) the mix (verifying he/she confirmed the O2 percentage).=20 a. This label may be a separate label, or part of the EANx band. = IANTD has waterproof, reusable Cylinder Contents labels and cylinder = content tape available for order.=20 4. Nitrox (EANx) cylinders must have a current Visual Inspection = (VIP) decal stated that oxygen-compatible lubricants have been used in = the system (valve, tank neck, and/or cylinder). EANx cylinders used with = EAN 41, or greater, or for direct partial pressure blending use, must = have an Oxygen Service Rated VIP decal. IANTD has VIP decals (which also = cover both tank and valve inspections) available for order.=20 a. It is recommended that an additional label using one of the = following options be used, these do not replace the requirement for the = wrap around labels I A Decal stating MOD to be placed length wise on the cylinder (IAND = inc./IANTD has these with both a fixed=20 MOD plus blank ones for the user to fill in the MOD, these are blue = with white lettering=20 II The MOD may also be painted on the cylinder III A cylinder wrap suitable for regulator hose storage with the MOD = boldly marked on it may also be used=20 (these are also available through IAND inc. / IANTD =20 D. LABELING EANx AND DECOMPRESSION CYLINDERS (GREATER THAN 40%) AND = OXYGEN (OR MIXTURES GREATER THAN 85% OXYGEN) MIXTURES 1. Cylinders containing EAN 40 to 84 must have either a = color-coded green and white label decal boldly stating, "Decompression = Mix EAN* _____." or they may use the "Breathing Gases Other Than Air" = decal that is red and white. (Note! This decal may be used with any gas = mixture as long as the mix and MOD are filled in) This label must be 10 = inches (25 centimeters) long and 4 inches (10 centimeters) wide. IANTD = has Cylinder Contents labels available for order. * Or, equivalent = acronym. These labels must be wrapped around the cylinder at the flat of = the cylinder=20 2. The decompression cylinder with the highest EANx mixture or = oxygen must have some form of protective mechanism to prevent the diver = from accidentally breathing from it. This may be a cover, bungie wrap or = other suitable means. IAND inc. / IANTD has a protective device = available=20 3. All decompression cylinders must have a tape or label above = the flat of the cylinder visible to the user with the mix or MOD or both = marked. IAND inc. IANTD has these with pre marked mix and MOD as well as = ones with blank spaces for the user to fill in.=20 4. Cylinders containing oxygen levels of 85% or greater must = adhere to one of the following:=20 a. Be painted either green or white with the word oxygen and MOD = 20 fsw (6 msw) legible=20 b. Have a 10 inches (25 centimeters) long by 4 inches (10 = centimeters) wide green adhesive band decal with the word "OXYGEN" and = MOD clearly and prominently printed in white on it. IANTD has waterproof = Oxygen Cylinder Decals available for order.=20 5. It is recommended that an additional label using one of the = following options, these do not replace the requirement for the wrap = around labels I A Decal stating MOD to be placed length wise on the cylinder (IAND = inc./IANTD has these with both a fixed=20 MOD plus blank ones for the user to fill in the MOD, these are blue = with white lettering=20 II The MOD may also be painted on the cylinder III A cylinder wrap suitable for regulator hose storage with the MOD = boldly marked on it may also be used=20 (these are also available through IAND inc. / IANTD =20 F. LABELING TRIMIX MIXTURES 1. Cylinders containing Trimix must be labeled with the word, = "Trimix", or "Breathing gas other than air". A Cylinder Contents Label = or tape reflecting the percentages of Oxygen, and Helium must be affixed = to the tank.=20 =20 =20 Respectfully yours, Tom Mount CEO IANTD World HQ http://www.iantd.com =20 Respectfully yours, Tom Mount CEO IANTD World HQ http://www.iantd.com ------=_NextPart_000_012E_01BE8814.180BC2E0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN"> <HTML> <HEAD> <META content=3Dtext/html;charset=3Diso-8859-1=20 http-equiv=3DContent-Type><TITLE>Tom,</TITLE><!DOCTYPE HTML PUBLIC = "-//W3C//DTD W3 HTML//EN"><!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 = HTML//EN"> <META content=3DWord.Document name=3DProgId> <META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR> <META content=3D"Microsoft Word 9" name=3DOriginator><LINK=20 href=3D"cid:filelist.xml@01*.75*" rel=3DFile-List><LINK=20 href=3D"cid:editdata.mso@01*.75*" rel=3DEdit-Time-Data><!--[if = VML]><![if !VMLRender]>=0D=0D<object id=3DVMLRender = classid=3D"CLSID:10072CEC-8CC1-11D1-986E-00A0C955B42E"=0D width=3D0 = height=3D0>=0D</object>=0D=0D<style>=0Dv\:* = {behavior:url(#VMLRender);}=0Do\:* {behavior:url(#VMLRender);}=0Dw\:* = {behavior:url(#VMLRender);}=0D.shape = {behavior:url(#VMLRender);}=0D=0D</style>=0D<![endif]><![endif]--><! --[if= gte mso 9]><xml>=0D <o:OfficeDocumentSettings>=0D = <o:DoNotRelyOnCSS/>=0D = </o:OfficeDocumentSettings>=0D</xml><![endif]--><!--[if gte mso = 9]><xml>=0D <w:WordDocument>=0D = <w:DocumentKind>DocumentEmail</w:DocumentKind>=0D <w:EnvelopeVis/>=0D = <w:DoNotOptimizeForBrowser/>=0D </w:WordDocument>=0D</xml><![endif]--> <STYLE> <!-- /* Font Definitions */ @font-face {font-family:Tahoma; panose-1:2 11 6 4 3 5 4 4 2 4; mso-font-charset:0; mso-generic-font-family:swiss; mso-font-pitch:variable; mso-font-signature:14983 0 0 0 255 0;} @font-face {font-family:"Arial Narrow"; panose-1:2 11 5 6 2 2 2 3 2 4; mso-font-charset:0; mso-generic-font-family:swiss; mso-font-pitch:variable; mso-font-signature:647 0 0 0 159 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-parent:""; margin:0in; margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman";} a:link, span.MsoHyperlink {color:blue; text-decoration:underline; text-underline:single;} a:visited, span.MsoHyperlinkFollowed {color:blue; text-decoration:underline; text-underline:single;} p.MsoAutoSig, li.MsoAutoSig, div.MsoAutoSig {margin:0in; margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman";} p {margin-right:0in; mso-margin-top-alt:auto; mso-margin-bottom-alt:auto; margin-left:0in; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman";} span.EmailStyle18 {mso-style-type:personal-reply; mso-ansi-font-size:10.0pt; mso-ascii-font-family:Arial; mso-fareast-font-family:"Times New Roman"; mso-hansi-font-family:Arial; mso-bidi-font-family:Arial; color:navy;} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in; mso-header-margin:.5in; mso-footer-margin:.5in; mso-paper-source:0;} div.Section1 {page:Section1;} /* List Definitions */ @list l0 {mso-list-id:17002547; mso-list-type:hybrid; mso-list-template-ids:978979236 1135536428 -502347810 78803552 = 883301672 -93164652 -1455929940 1538704742 2009650856 -2051511164;} @list l0:level1 {mso-level-number-format:alpha-lower; mso-level-tab-stop:.5in; mso-level-number-position:left; text-indent:-.25in; font-family:"Times New Roman";} @list l1 {mso-list-id:18624726; mso-list-type:hybrid; mso-list-template-ids:1610404868 1249783584 1376830414 1222647866 = -1607719702 1778835662 -1121667000 430709548 -1320489142 -1641248034;} @list l1:level1 {mso-level-number-format:alpha-lower; mso-level-tab-stop:.5in; mso-level-number-position:left; text-indent:-.25in; font-family:"Times New Roman";} @list l2 {mso-list-id:36593145; mso-list-type:hybrid; mso-list-template-ids:-1036244254 -2012726288 -1274914206 -280564768 = -1523778894 418781518 692511872 -1267673664 -1257187272 1920216548;} @list l3 {mso-list-id:139080426; mso-list-type:hybrid; mso-list-template-ids:-754412018 163983466 -1445676084 700902374 = 2031147510 1450358326 -1333498798 508191234 1795179072 -418852730;} @list l3:level1 {mso-level-start-at:4; mso-level-tab-stop:.5in; mso-level-number-position:left; text-indent:-.25in; font-family:"Times New Roman";} @list l4 {mso-list-id:389697885; mso-list-type:hybrid; mso-list-template-ids:1423468802 -302989778 -2027766236 -320406546 = -1812841208 -490707872 1366580086 953305076 -638410650 -487921430;} @list l5 {mso-list-id:633097395; mso-list-type:hybrid; mso-list-template-ids:-1903263510 -166702242 -1404276610 799585892 = -1921764034 387094056 -273779536 -276241560 -1238222048 -1678636850;} @list l5:level1 {mso-level-start-at:6; mso-level-number-format:alpha-upper; mso-level-tab-stop:.5in; mso-level-number-position:left; text-indent:-.25in; font-family:"Times New Roman";} @list l6 {mso-list-id:830559560; mso-list-type:hybrid; mso-list-template-ids:-863105144 1193440852 -402983448 1571709718 = -1204152926 1177858436 -1538336076 -340382990 -644810528 1238295722;} @list l6:level1 {mso-level-number-format:alpha-lower; mso-level-tab-stop:.5in; mso-level-number-position:left; text-indent:-.25in; font-family:"Times New Roman";} @list l7 {mso-list-id:1172986115; mso-list-type:hybrid; mso-list-template-ids:302283532 530378816 1788628924 1912364826 = -1020383052 -1128763272 431792870 -803054516 1831253724 -965324702;} @list l7:level1 {mso-level-start-at:5; mso-level-tab-stop:.5in; mso-level-number-position:left; text-indent:-.25in; font-family:"Times New Roman";} @list l8 {mso-list-id:1837064917; mso-list-type:hybrid; mso-list-template-ids:-1953229428 -60010162 -1711787872 -332503232 = -2079032208 1688736718 773606530 -1413460348 -1827872406 1495072330;} ol {margin-bottom:0in;} ul {margin-bottom:0in;} --> </STYLE> <!--[if gte mso 9]><xml>=0D <o:shapedefaults v:ext=3D"edit" = spidmax=3D"1027"/>=0D</xml><![endif]--><!--[if gte mso 9]><xml>=0D = <o:shapelayout v:ext=3D"edit">=0D <o:idmap v:ext=3D"edit" = data=3D"1"/>=0D </o:shapelayout></xml><![endif]--><!doctype HTML PUBLIC> </HEAD> <BODY bgColor=3Dwhite lang=3DEN-US link=3Dblue style=3D"tab-interval: = ..5in" vLink=3Dblue> <DIV><FONT color=3D#000000 face=3DArial size=3D2>Robert</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>The MOD only does not = specify the=20 mix</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>The MOD is visible to the buddy but not = as apparent=20 to the diver, as it runs length wise down the cylinder</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>The IANTD labels per standards going = into effect 1=20 May all of this is listed in the standards I posted with the original = response=20 to Bill</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT><FONT color=3D#000000 = face=3DArial size=3D2>IANTD=20 labeling</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Has a type gas identifier these include = Oxygen,=20 Nitrox, Deco Gas and Breathing gases other than air . With the exception = of the=20 Nitrox label all of these state mix and MOD. When the Nitrox label is = used a=20 separate MOD is recorded</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>2. A tape label is affixed to the neck = of the=20 cylinder so the diver can read it, this tape is for the diver to = be able=20 to glance down and see as well as visible with the bottle upright when = stowed on=20 a boat</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>3. We have labels now that run length = on the=20 cylinders with MOD in large letters, some of these labels have a fixed = MOD, some=20 allow the diver to write in the MOD</FONT></DIV> <DIV><FONT face=3DArial size=3D2> A. We allow the cylinder to be = painted with=20 MOD should the diver prefer </FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>4. A protective device is worn over the = mouthpiece=20 of the hottest mix.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>In training our mixtures and tables are = not the=20 same as used by WKPP and there is no reason why they should = be.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>We do have fixed MOD labels for the = depths we use=20 on our tables and the mixes we use.We have MOD labels that may be filled = in for=20 other mixtures</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>So the fact that we = label MOD with a=20 blue label instead of paint makes ours less safe than yours , you must = be=20 kidding.</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>The fact that we do = multifaceted=20 methods of ensuring the diver knows both mix and MOD is less safe than = what you=20 advocate again where is the logic in that</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>The fact that we = require a protective=20 device over the mouthpiece is less safe than your single MOD painted = cylinder=20 You really must be kidding Robert</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>We have multi = indications of both mix=20 and MOD and you have only one and you argue that ours is less safe, = repeat that=20 to yourself and see just how humorous it sounds.</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>You argue what a lawyer = will say=20 guess what I bet you will find your system, that list only MOD and only = on the=20 side of a cylinder, far more at risk from a legal perspective in = event of=20 an accident than ours. </FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>As you know all = standards we now=20 produce are sent for legal review prior to being presented. = </FONT></DIV> <DIV><FONT face=3DArial size=3D2>We are more than confident that with = the minor=20 modification /additions this year that our labeling and cylinder = identification=20 is by far the safest to be found.</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>Now whatever I state = you guys will=20 argue over (even if I were to say Hi Guys somehow it would be offensive = to you,=20 and I really do not care , I do care about diver safety just as our = entire BOA=20 and licensees do and that is how we structure our programs. = </FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>There is no need for me = to continue=20 in this discussion so please remove me from the CC list. I have replied = to the=20 original post by Bill and I have addressed your opinion about the single = MOD Vs=20 our method of listing MOD, mix, and gas identifiers.</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>You will continue your = process we=20 will do what we feel is much safer than just a MOD without a current mix = labeled=20 on it. You trust the diver to always have an identical mix we assume = they may=20 not thus mix and MOD are required and will continue to be so. = </FONT></DIV> <DIV> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>Robert if you truly = believe that MOD=20 painted on the cylinder is all that is needed why is it that when = I have=20 dived from your facility you guys have taken tape and wrote mix on it = Seems like=20 you also wish to verify both from your own facility. When you do that = your=20 system really is not much different.</FONT></DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2></FONT> </DIV> <DIV> </DIV> <DIV><FONT color=3D#000000 face=3DArial size=3D2>Have fun, be safe and = go=20 diving</FONT><FONT color=3D#000000 face=3DArial = size=3D2><BR>Respectfully=20 yours,<BR>Tom Mount<BR>CEO IANTD World HQ<BR><A=20 href=3D"http://www.iantd.com">http://www.iantd.com</A><BR></FONT></D IV> <BLOCKQUOTE=20 style=3D"BORDER-LEFT: #000000 solid 2px; MARGIN-LEFT: 5px; PADDING-LEFT: = 5px"> <DIV><FONT face=3DArial size=3D2><B>-----Original = Message-----</B><BR><B>From:=20 </B>Robert M. Carmichael <<A=20 = href=3D"mailto:halcyon@ha*.ne*">halcyon@halcyon.net</A>><BR><B>To:= =20 </B>Bill Mee <<A = href=3D"mailto:wwm@sa*.ne*">wwm@safari.net</A>>; Tom=20 Mount <<A=20 = href=3D"mailto:TOM.MOUNT@wo*.at*.ne*">TOM.MOUNT@worldnet.att.net</A>= >;=20 <A href=3D"mailto:cavers@cavers.com">cavers@cavers.com</A> <<A=20 = href=3D"mailto:cavers@cavers.com">cavers@cavers.com</A>><BR><B>Cc: = </B><A=20 href=3D"mailto:kirvine@sa*.ne*">kirvine@safari.net</A> <<A=20 href=3D"mailto:kirvine@sa*.ne*">kirvine@safari.net</A>>; = "John R.=20 Rose" <<A = href=3D"mailto:rose@cs*.sc*.ed*">rose@cs.sc.edu</A>>;=20 "Jesse Armantrout" <<A=20 = href=3D"mailto:armantrout@wo*.at*.ne*">armantrout@worldnet.att.net</= A>>;=20 "John Grogan" <<A=20 = href=3D"mailto:john@ro*.co*.uk*">john@rockportcapital.co.uk</A>= >;=20 "Chris Elmore" <<A=20 = href=3D"mailto:elmorec@ga*.cl*.sc*.ed*">elmorec@garnet.cla.sc.edu</A>&g= t;;=20 Ken Sallot <<A=20 href=3D"mailto:sallot@mi*.co*">sallot@mindspring.com</A>>; = Jeff=20 Bentley <<A=20 = href=3D"mailto:jeffbentley@mi*.co*">jeffbentley@mindspring.com</A>= ><BR><B>Date:=20 </B>Thursday, April 15, 1999 10:02 PM<BR><B>Subject: </B>RE: = labeling reply=20 to Bill Mee (TANK MARKING)<BR><BR></DIV></FONT> <DIV class=3DSection1> <P class=3DMsoNormal><SPAN class=3DEmailStyle18><FONT color=3Dnavy = face=3DArial=20 size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt">Tom,<O:P></SPAN></FONT></SPAN></P> <P class=3DMsoNormal><SPAN class=3DEmailStyle18><FONT color=3Dnavy = face=3DArial=20 size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><![if = !supportEmptyParas]> <![endif]><O:P></SPAN></FONT></SPAN>< ;/P> <P class=3DMsoNormal><SPAN class=3DEmailStyle18><FONT color=3Dnavy = face=3DArial=20 size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt">MOD=20 labeling is the only identification that makes complete sense. MOD = labeling=20 is clear, direct, and demands only the absolute minimum in-water=20 interpretation by the diver for safe in-water use. Your method may = have been=20 the best when it stood alone as the only standardized system, but is = clearly=20 flawed.<O:P></SPAN></FONT></SPAN></P> <P class=3DMsoNormal><SPAN class=3DEmailStyle18><FONT color=3Dnavy = face=3DArial=20 size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><![if = !supportEmptyParas]> <![endif]><O:P></SPAN></FONT></SPAN>< ;/P> <P class=3DMsoNormal><SPAN class=3DEmailStyle18><FONT color=3Dnavy = face=3DArial=20 size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt">After=20 George and I recovered Jane Ornsteins body an opined that your = bottle=20 marking was a major factor in her consumption of 900 psi of = “DECO=20 gas” (80/20 nitrox) from 130~up, I thought you would = “advance=20 safety” once again.<O:P></SPAN></FONT></SPAN></P> <P class=3DMsoNormal><SPAN class=3DEmailStyle18><FONT color=3Dnavy = face=3DArial=20 size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><![if = !supportEmptyParas]> <![endif]><O:P></SPAN></FONT></SPAN>< ;/P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt">I=20 will listen to you argue the “extra bottles required for the = MOD=20 method” providing you use a notepad or perhaps a calculator. = You will=20 arrive at the simple conclusion of the same amount of bottles, = regardless.=20 It is as simple as 1 bottle for O2 (see baker’s dozen on = 80/20), 1=20 bottle for 50% (70’), and another for 35%~ (120’). <SPAN = style=3D"mso-spacerun: yes"> </SPAN>The 120 MODottles also act = as our=20 standard single tank ocean dive bottles. We use the 190 bottles for = our=20 hyperoxic trimix dives beyond 100’ as well as for deco. Since = you do=20 not see a need for 190 deco, this leaves you with a total need of 3 = tanks=20 dedicated to either DECO, single tanking, or shallow RB drive gas. = How can=20 you cut down on the number of bottles to do all your dives; basic, = advanced,=20 training or exploration?<O:P></SPAN></FONT></SPAN></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><![if = !supportEmptyParas]> <![endif]><O:P></SPAN></FONT></SPAN>< ;/P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt">“DECO=20 GAS” (80/20) / ‘NITROX” (21%-50%) marking leaves = much to=20 interpretation while requiring calculation for determination of what = should=20 have been on the bottle to start with, the only info needed-MOD = (core, root,=20 etc).<O:P> </SPAN></FONT></SPAN></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><![if = !supportEmptyParas]> <![endif]><O:P></SPAN></FONT></SPAN>< ;/P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt">Visible=20 by all members from afar, is yet another luxury/benefit afforded by = the most=20 simple of systems-MOD. When we found Jane in 260’ of water, it = was=20 very difficult to tell the difference in gases (one on the left had = 3000 psi=20 of “nitrox” while the one on her right had 2100psi of=20 “deco mix”. I suppose the lawyers will also have a field = day=20 given the fact that both “NITROX” and “DECO” = are not=20 spelled with the letter “O”, instead they have your = circular=20 LOGO. I can hear the plaintiff’s counsel suggesting that you = where=20 more concerned about name recognition when INFORMATION exchange = should have=20 been the only goal. Apparently the other diver’s in = Jane’s class=20 (in 300’ of water) did not take note that she was on = “DECO=20 mix” for the 25 minute period ascending to the 30’ gas = switch. I=20 stand by my argument that MOD shouts louder and provides instant = information=20 than an ambiguous collage of a decal with a logo in the middle. I = can see=20 exactly what gas my team member’s are on without having to = remind=20 myself that I am looking at the opposite of what I am meant to be = thinking=20 (Jane’s right was Dereck’s left). TASK LOADING brings = out the=20 weaknesses in human factor compatibility, to the intelligent diver = this=20 means going to the core root of the problem and choosing=20 SIMPLICITY.<O:P></SPAN></FONT></SPAN></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><![if = !supportEmptyParas]> <![endif]><O:P></SPAN></FONT></SPAN>< ;/P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><SPAN=20 style=3D"mso-spacerun: yes"> </SPAN>If a simple system works on = massive=20 dives, basic dives, in all languages, with any diver, without = calculation=20 and is less expensive, why then is it not for=20 “training”?<O:P></SPAN></FONT></SPAN></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><![if = !supportEmptyParas]> <![endif]><O:P></SPAN></FONT></SPAN>< ;/P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt">We=20 can start a fund raiser to retire the excess decal’s and help = re-write=20 that section of your manuals (save trees) if it would help, do I = hear a=20 second on this? If you accept simply acknowledge so by cross posting = this=20 note over to techdiver and the other various related sites where=20 “safety advances” via information exchange can be = implemented=20 immediately.<O:P> </SPAN></FONT></SPAN></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><![if = !supportEmptyParas]> <![endif]><O:P></SPAN></FONT></SPAN>< ;/P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt">RMC<O:P></SPAN></FONT></SPAN></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><SPAN=20 class=3DEmailStyle18><FONT color=3Dnavy face=3DArial size=3D2><SPAN=20 style=3D"FONT-FAMILY: Arial; FONT-SIZE: 10pt; mso-bidi-font-size: = 12.0pt"><![if = !supportEmptyParas]> <![endif]><O:P></SPAN></FONT></SPAN>< ;/P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in; TEXT-INDENT: = -0.5in"><FONT=20 color=3Dblack face=3DTahoma size=3D2><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Tahoma; FONT-SIZE: = 10pt">age-----<BR><B>From:</B>=20 Bill Mee [mailto:wwm@sa*.ne*]<BR><B>Sent:</B> Thursday, April 15, = 1999=20 5:35 PM<BR><B>To:</B> Tom Mount; cavers@cavers.com<BR><B>Cc:</B>=20 kirvine@sa*.ne*; "John R. Rose"; "Jesse = Armantrout";=20 "John Grogan"; "Chris Elmore"; Ken Sallot; Jeff=20 Bentley<BR><B>Subject:</B> Re: labeling reply to Bill = Mee</SPAN></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = face=3D"Times New Roman"><![if = !supportEmptyParas]> <![endif]><O:P></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = color=3Dblack=20 face=3D"Times New Roman"><SPAN style=3D"COLOR: = black">Tom,</SPAN></FONT><FONT=20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = color=3Dblack=20 face=3D"Times New Roman"><SPAN style=3D"COLOR: = black"> </SPAN></FONT><FONT=20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = color=3Dblack=20 face=3D"Times New Roman"><SPAN style=3D"COLOR: black">What is with = you? No=20 where in these standards can I find a mandate to paint 3" MOD = numbers=20 on both sides of the tanks. This system is so simple and so = effective=20 as to be almost self evident. Everyone understands the = perfectly clear=20 and sensible rationale for doing this. Why can't you simply = place this=20 requirement at or near the beginning of your = list?</SPAN></FONT><FONT=20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = color=3Dblack=20 face=3D"Times New Roman"><SPAN style=3D"COLOR: = black"> </SPAN></FONT><FONT=20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = color=3Dblack=20 face=3D"Times New Roman"><SPAN style=3D"COLOR: black">As for the = student who=20 unfortunately breathed the unmarked unanalyzed gas. This gas = was=20 described as "air" and was his = "bailout". =20 May I have the temerity to ask whose idea was it to bail out to=20 "air". Was this the student's or Gurr's? Under the = stressful=20 conditions which might precipitate the need to bailout it would seem = to me=20 to be the last gas one would want to switch over to in a crisis = situation.=20 We all remember what happened to Rob Parker when he switched over to = air=20 deep and I am sure that Abner Chowdry remembers what happens under = these=20 circumstances all too well.</SPAN></FONT><FONT color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = color=3Dblack=20 face=3D"Times New Roman"><SPAN style=3D"COLOR: = black"> </SPAN></FONT><FONT=20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = color=3Dblack=20 face=3D"Times New Roman"><SPAN style=3D"COLOR: black">Best=20 regards,</SPAN></FONT><FONT color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = color=3Dblack=20 face=3D"Times New Roman"><SPAN style=3D"COLOR: = black"> </SPAN></FONT><FONT=20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal style=3D"MARGIN-LEFT: 0.5in"><FONT = color=3Dblack=20 face=3D"Times New Roman"><SPAN style=3D"COLOR: = black">Bill</SPAN></FONT><FONT=20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <DIV=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: black solid 1.5pt; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; PADDING-BOTTOM: 0in; = PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; PADDING-TOP: 0in"> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-BOTTOM: 12pt; = MARGIN-LEFT: 39.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; = PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; PADDING-TOP: 0in; = mso-margin-top-alt: auto; mso-border-left-alt: solid black = 1.5pt"><B><FONT=20 color=3Dblack face=3DArial size=3D2><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial; FONT-SIZE: = 10pt">-----Original=20 Message-----</SPAN></FONT></B><FONT color=3Dblack face=3DArial = size=3D2><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial; FONT-SIZE: = 10pt"><BR><B>From:=20 </B>Tom Mount <<A=20 = href=3D"mailto:TOM.MOUNT@wo*.at*.ne*">TOM.MOUNT@worldnet.att.net</A>= ><BR><B>To:=20 </B><A href=3D"mailto:cavers@cavers.com">cavers@cavers.com</A> = <<A=20 = href=3D"mailto:cavers@cavers.com">cavers@cavers.com</A>><BR><B>Date: =20 </B>Tuesday, April 13, 1999 3:55 PM<BR><B>Subject: </B>labeling = reply to=20 Bill Mee</SPAN></FONT><FONT color=3Dblack face=3DArial = size=3D2><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial; FONT-SIZE: 10pt; = mso-color-alt: windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 39.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-margin-bottom-alt: auto; = mso-border-left-alt: solid black 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman" size=3D2><SPAN=20 style=3D"COLOR: black; FONT-SIZE: 10pt">Bill</SPAN></FONT><FONT=20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 39.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; mso-border-left-alt: solid black 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman" size=3D2><SPAN=20 style=3D"COLOR: black; FONT-SIZE: 10pt">What is with you. We do not = allow as=20 you accuse. </SPAN></FONT><FONT color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 39.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; mso-border-left-alt: solid black 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman" size=3D2><SPAN=20 style=3D"COLOR: black; FONT-SIZE: 10pt">some idiot filled a cylinder = labeled=20 as air with a hot mix and left the air label on it. The diver had = been using=20 the same air cylinder all week as a bailout cylinder and had no = reason to=20 think someone would fill it with a hot mix.</SPAN></FONT><FONT=20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 39.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; mso-border-left-alt: solid black 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman"><SPAN=20 style=3D"COLOR: black"> </SPAN></FONT><FONT color=3Dblack><SPAN = style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 39.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; mso-border-left-alt: solid black 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman" size=3D2><SPAN=20 style=3D"COLOR: black; FONT-SIZE: 10pt">If you dived a cylinder = yesterday that=20 had air in it and was labeled air and you left it at for instance at = Brownies dive shop would you suspect overnight someone had = changed the=20 mix?</SPAN></FONT><FONT color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 39.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; mso-border-left-alt: solid black 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman"><SPAN=20 style=3D"COLOR: black"> </SPAN></FONT><FONT color=3Dblack><SPAN = style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 39.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; mso-border-left-alt: solid black 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman" size=3D2><SPAN=20 style=3D"COLOR: black; FONT-SIZE: 10pt">As per IANTD mixing = standards=20 </SPAN></FONT><FONT color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 39.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><B><FONT=20 color=3Dblack face=3D"Arial Narrow" size=3D4><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; FONT-SIZE: = 13.5pt">LABELING=20 BOTTOM MIX EANx MIXTURES WITH LESS THAN 41% = OXYGEN</SPAN></FONT></B><B><FONT=20 color=3Dblack face=3D"Arial Narrow" size=3D4><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; FONT-SIZE: 13.5pt; = mso-color-alt: windowtext"><O:P></SPAN></FONT></B></P></DIV> <DIV=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: black solid 1.5pt; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; PADDING-BOTTOM: 0in; = PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; PADDING-TOP: 0in"> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 75.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; TEXT-INDENT: -0.25in; = mso-border-left-alt: solid black 1.5pt; mso-list: l4 level1 lfo1; = tab-stops: list 1.0in"><![if !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">1.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">Where applicable = cylinders=20 must be marked per legal requirements in addition to the below=20 </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l4 level1 lfo1; tab-stops: list 1.0in"><![if = !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">2.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">Cylinders painted = yellow=20 must be labeled with a 4 inches (10 centimeters) green band. The = band must=20 wrap around the tank starting at the flat of the cylinder. The label = must=20 state "Enriched Air Nitrox" (or an applicable acronym). = IANTD has=20 EANx decals available for labeling tanks. </SPAN></FONT><FONT = color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l4 level1 lfo2; tab-stops: list 1.0in"><![if = !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">1.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">Cylinders painted = with=20 colors other than yellow require a 6 inches (15 centimeter) Enriched = Air=20 Nitrox band (decal) with the top 1 inch (2.5 centimeters) and the = bottom 1=20 inch (2.5 centimeters) yellow. The middle of the band (decal) should = be=20 printed with a green background and the message, "Enriched Air=20 Nitrox" (or an applicable acronym) printed in yellow for easy=20 identification. </SPAN></FONT><FONT color=3Dblack face=3D"Arial = Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l4 level1 lfo2; tab-stops: list 1.0in"><![if = !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">2.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">Nitrox (EANx) = cylinders must=20 have Cylinder Contents Labels affixed to them. The Contents label = must state=20 the oxygen percentage currently in the cylinder and the Maximum = Operating=20 Depth (MOD). The label must be dated and signed by the person who = purchased=20 (or requested) the mix (verifying he/she confirmed the O<SUB>2</SUB> = percentage). </SPAN></FONT><FONT color=3Dblack face=3D"Arial = Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 75.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; TEXT-INDENT: -0.25in; = mso-border-left-alt: solid black 1.5pt; mso-list: l1 level1 lfo3; = tab-stops: list 1.0in"><![if !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">a.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">This label may be = a separate=20 label, or part of the EANx band. IANTD has waterproof, reusable = Cylinder=20 Contents labels and cylinder content tape available for order.=20 </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 75.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; TEXT-INDENT: -0.25in; = mso-border-left-alt: solid black 1.5pt; mso-list: l3 level1 lfo4; = tab-stops: list 1.0in"><![if !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">4.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">Nitrox (EANx) = cylinders must=20 have a current Visual Inspection (VIP) decal stated that = oxygen-compatible=20 lubricants have been used in the system (valve, tank neck, and/or = cylinder).=20 EANx cylinders used with EAN 41, or greater, or for direct partial = pressure=20 blending use, must have an Oxygen Service Rated VIP decal. IANTD has = VIP=20 decals (which also cover both tank and valve inspections) available = for=20 order. </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN = style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 5pt 0.5in = 5pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l6 level1 lfo5; tab-stops: list 1.0in"><![if = !supportLists]><B><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">a.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> = </SPAN></FONT></SPAN></FONT></B><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN style=3D"COLOR: black; FONT-FAMILY: = Arial Narrow">It=20 is recommended that an additional label using one of the following = options=20 be used, <B>these do not replace the requirement for the wrap around = labels</B></SPAN></FONT><B><FONT color=3Dblack face=3D"Arial = Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></B></P></DIV> <DIV=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: black solid 1.5pt; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; PADDING-BOTTOM: 0in; = PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; PADDING-TOP: 0in"> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">I A Decal stating = MOD to be=20 placed length wise on the cylinder (IAND inc./IANTD has these with = both a=20 fixed </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">MOD plus blank = ones for the=20 user to fill in the MOD, these are blue with white lettering=20 </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">II The MOD may = also be=20 painted on the cylinder</SPAN></FONT><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">III A cylinder = wrap suitable=20 for regulator hose storage with the MOD boldly marked on it may also = be used=20 </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">(these are also = available=20 through IAND inc. / IANTD</SPAN></FONT><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial = Narrow"> </SPAN></FONT><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P></DIV> <DIV=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: black solid 1.5pt; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; PADDING-BOTTOM: 0in; = PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; PADDING-TOP: 0in"> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 39.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><B><FONT=20 color=3Dblack face=3D"Arial Narrow" size=3D4><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; FONT-SIZE: = 13.5pt">D.=20 LABELING EANx AND DECOMPRESSION CYLINDERS (GREATER THAN 40%) AND = OXYGEN (OR=20 MIXTURES GREATER THAN 85% OXYGEN) MIXTURES</SPAN></FONT></B><B><FONT = color=3Dblack face=3D"Arial Narrow" size=3D4><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; FONT-SIZE: 13.5pt; = mso-color-alt: windowtext"><O:P></SPAN></FONT></B></P></DIV> <DIV=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: black solid 1.5pt; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; PADDING-BOTTOM: 0in; = PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; PADDING-TOP: 0in"> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 75.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; TEXT-INDENT: -0.25in; = mso-border-left-alt: solid black 1.5pt; mso-list: l8 level1 lfo6; = tab-stops: list 1.0in"><![if !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">1.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">Cylinders = containing EAN 40=20 to 84 must have either a color-coded green and white label decal = boldly=20 stating, "Decompression Mix EAN* _____." or they may use = the=20 "Breathing Gases Other Than Air" decal that is red and = white.=20 (Note! This decal may be used with any gas mixture as long as the = mix and=20 MOD are filled in) This label must be 10 inches (25 centimeters) = long and 4=20 inches (10 centimeters) wide. IANTD has Cylinder Contents labels = available=20 for order. * Or, equivalent acronym. These labels must be wrapped = around the=20 cylinder at the flat of the cylinder </SPAN></FONT><FONT = color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l8 level1 lfo6; tab-stops: list 1.0in"><![if = !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">2.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">The decompression = cylinder=20 with the highest EANx mixture or oxygen must have some form of = protective=20 mechanism to prevent the diver from accidentally breathing from it. = This may=20 be a cover, bungie wrap or other suitable means. IAND inc. / IANTD = has a=20 protective device available </SPAN></FONT><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l8 level1 lfo6; tab-stops: list 1.0in"><![if = !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">3.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">All decompression = cylinders=20 must have a tape or label above the flat of the cylinder visible to = the user=20 with the mix or MOD or both marked. IAND inc. IANTD has these with = pre=20 marked mix and MOD as well as ones with blank spaces for the user to = fill=20 in. </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l8 level1 lfo6; tab-stops: list 1.0in"><![if = !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">4.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">Cylinders = containing oxygen=20 levels of 85% or greater must adhere to one of the following:=20 </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 75.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; TEXT-INDENT: -0.25in; = mso-border-left-alt: solid black 1.5pt; mso-list: l0 level1 lfo7; = tab-stops: list 1.0in"><![if !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">a.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN style=3D"COLOR: black; FONT-FAMILY: = Arial Narrow">Be=20 painted either green or white with the word oxygen and MOD 20 fsw (6 = msw)=20 legible </SPAN></FONT><FONT color=3Dblack face=3D"Arial = Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l0 level1 lfo7; tab-stops: list 1.0in"><![if = !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">b.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">Have a 10 inches = (25=20 centimeters) long by 4 inches (10 centimeters) wide green adhesive = band=20 decal with the word "OXYGEN" and MOD clearly and = prominently=20 printed in white on it. IANTD has waterproof Oxygen Cylinder Decals=20 available for order. </SPAN></FONT><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 5pt 0.5in = 5pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l7 level1 lfo8; tab-stops: list 1.0in"><![if = !supportLists]><B><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">5.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> = </SPAN></FONT></SPAN></FONT></B><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN style=3D"COLOR: black; FONT-FAMILY: = Arial Narrow">It=20 is recommended that an additional label using one of the following = options,=20 <B>these do not replace the requirement for the wrap around=20 labels</B></SPAN></FONT><B><FONT color=3Dblack face=3D"Arial = Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></B></P></DIV> <DIV=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: black solid 1.5pt; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; PADDING-BOTTOM: 0in; = PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; PADDING-TOP: 0in"> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">I A Decal stating = MOD to be=20 placed length wise on the cylinder (IAND inc./IANTD has these with = both a=20 fixed </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">MOD plus blank = ones for the=20 user to fill in the MOD, these are blue with white lettering=20 </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">II The MOD may = also be=20 painted on the cylinder</SPAN></FONT><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">III A cylinder = wrap suitable=20 for regulator hose storage with the MOD boldly marked on it may also = be used=20 </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">(these are also = available=20 through IAND inc. / IANTD</SPAN></FONT><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 147.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial = Narrow"> </SPAN></FONT><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P></DIV> <DIV=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: black solid 1.5pt; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; PADDING-BOTTOM: 0in; = PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; PADDING-TOP: 0in"> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 5pt 0.5in = 5pt 75.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; TEXT-INDENT: -0.25in; mso-border-left-alt: solid black = 1.5pt; mso-list: l5 level1 lfo9; tab-stops: list 1.0in"><![if = !supportLists]><B><FONT=20 color=3Dblack face=3D"Arial Narrow" size=3D4><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; FONT-SIZE: 13.5pt; = mso-color-alt: windowtext">F.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT></B><![endif]><B><FONT color=3Dblack=20 face=3D"Arial Narrow" size=3D4><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; FONT-SIZE: = 13.5pt">LABELING=20 TRIMIX MIXTURES</SPAN></FONT></B><B><FONT color=3Dblack = face=3D"Arial Narrow"=20 size=3D4><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; FONT-SIZE: 13.5pt; = mso-color-alt: windowtext"><O:P></SPAN></FONT></B></P> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 75.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; TEXT-INDENT: -0.25in; = mso-border-left-alt: solid black 1.5pt; mso-list: l2 level1 lfo10; = tab-stops: list 1.0in"><![if !supportLists]><FONT=20 color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext">1.<FONT=20 face=3D"Times New Roman" size=3D1><SPAN=20 style=3D"FONT-SIZE: 7pt; FONT-STYLE: normal; FONT-VARIANT: normal; = FONT-WEIGHT: normal; LINE-HEIGHT: normal"=20 Roman"" New Times> =20 </SPAN></FONT></SPAN></FONT><![endif]><FONT color=3Dblack=20 face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow">Cylinders = containing Trimix=20 must be labeled with the word, "Trimix", or = "Breathing gas=20 other than air". A Cylinder Contents Label or tape reflecting = the=20 percentages of Oxygen, and Helium must be affixed to the tank.=20 </SPAN></FONT><FONT color=3Dblack face=3D"Arial Narrow"><SPAN=20 style=3D"COLOR: black; FONT-FAMILY: Arial Narrow; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P></DIV> <DIV=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: black solid 1.5pt; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; PADDING-BOTTOM: 0in; = PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; PADDING-TOP: 0in"> <P=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN-LEFT: = 39.75pt; MARGIN-RIGHT: 0.5in; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; = PADDING-RIGHT: 0in; PADDING-TOP: 0in; mso-border-left-alt: solid black = 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman"><SPAN=20 style=3D"COLOR: black"> </SPAN></FONT><FONT color=3Dblack><SPAN = style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 39.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; mso-border-left-alt: solid black 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman" size=3D2><SPAN=20 style=3D"COLOR: black; FONT-SIZE: 10pt"><BR>Respectfully = yours,<BR>Tom=20 Mount<BR>CEO IANTD World HQ<BR><A=20 = href=3D"http://www.iantd.com">http://www.iantd.com</A></SPAN></FONT>< ;FONT= =20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P> <P class=3DMsoNormal=20 style=3D"BORDER-BOTTOM: medium none; BORDER-LEFT: medium none; = BORDER-RIGHT: medium none; BORDER-TOP: medium none; MARGIN: 0in 0.5in = 0pt 39.75pt; PADDING-BOTTOM: 0in; PADDING-LEFT: 4pt; PADDING-RIGHT: 0in; = PADDING-TOP: 0in; mso-border-left-alt: solid black 1.5pt"><FONT=20 color=3Dblack face=3D"Times New Roman" size=3D2><SPAN=20 style=3D"COLOR: black; FONT-SIZE: 10pt"><BR>Respectfully = yours,<BR>Tom=20 Mount<BR>CEO IANTD World HQ<BR><A=20 = href=3D"http://www.iantd.com">http://www.iantd.com</A></SPAN></FONT>< ;FONT= =20 color=3Dblack><SPAN=20 style=3D"COLOR: black; mso-color-alt: = windowtext"><O:P></SPAN></FONT></P></DIV></DIV></BLOCKQUOTE ></BODY></HTML= > ------=_NextPart_000_012E_01BE8814.180BC2E0--
Navigate by Author:
[Previous]
[Next]
[Author Search Index]
Navigate by Subject:
[Previous]
[Next]
[Subject Search Index]
[Send Reply] [Send Message with New Topic]
[Search Selection] [Mailing List Home] [Home]