Mailing List Archive

Mailing List: cavers

Banner Advert

Message Display

Date: Sat, 09 Jan 1999 17:04:39 -0500
From: KVI <kirvine@sa*.ne*>
Organization: DIR
To: freeattic@co*.ci*.uf*.ed*
CC: cavers@cavers.com
Subject: I NOW KNOW WHO GAVE THEM THE SCOOTER
I just received the drawings that lying scumbag Stone made of our
scooter, and now know who screwed us. 

  He got his hands on the second one I ever made. There were only two
like that, one of them I still have. He got Casey's scooter from either
the guy he sold it to, Jim Wei, or Jason Richards. It had to be Jason
Richards who was living with Wei at the time. The guy who actually
bought it was out of the country as far as I know.

  Jason Richards is a lying scumbag as well as one of the worst strokes
I have ever met. I will look forward to seeing him again in person. 

  Now for the really telling part about that idiot Stone. This is one
seriously stupid individual, no matter what he has been able to pretend
he is. Stupid is the only word that I can think of that fits what he
wrote in his 35 pages of drawings on Cis Lunar headers. Obviosuly Cis
Lunar is a real stand up outfit as well, allowing Stone to do this . I
will be pasing this on to the Navy and let them konw what they are
dealing with in Stone and Nordstrom next time they try to make a speel
there , as if they do not already know by now.

  He has cirticized the simple design of Bill Gavin in his notes,
despite the fact that he does not undersatand it, and despite the fact
that the dumb bastard could not successfully reproduce it over months of
trying . This guy is a joke as an engineer.

  He "improved" the scooter by making the nose cone a barrel seal
proving exactly how dangerously stupid he is in this kind of thing. He
criticized my placing spacers in the batteries , calling it a "kluge" (
for the real definition of "kluge", I have the Cis Luanr Manual). He is
too freaking stupid to realize that batteries come in weight variences,
and pvc is not specifed as to weight or thickness beyond a certain
point, hence the moveable small spacers. He suggests making pvc thick
spacers - a dumb ass in action. The pvc weighs too much. A 3/4 inch disk
the size of a bulkhead would weigh 6 pounds, requiring two and 1/2
inches more of body for each spacer, so we would need the scooter to be
ten inches longer just for spacers - Stone is a real bright guy.

  He goes on to show this lack of understanding and a lack of simple
math by not recognizing the material variance and trying to position the
legs with respect to everything but the obvious. A real dumb ass. I did
it in the computer program that spins the plate  - real tough.

  He suggests putting inserts in the brackets not understanding what the
real problem is ( he copied the wrong design anyway ). He copied the
wrong motor compartment, and fretted over that like a complete moron .
The measurements are so ridiculous - he did not realize that some stuff
is custom made by me, other stuff is off the shelf. Obviously that idiot
Jason Richards replaced the circuit board and relay I put in there, and
Stone spent a big time fretting over that again never seing the real
thing.

  He meticulously measured the legs and must have ended up with a real
headbanger - the thing must beat itself to death at about 150 feet . I
thought this lying asshole was a structural engineer - he is obviously
so stupid and so incompetenet that he can not even understand s simple
set of variables like what he was working with here . His drawings are
so lacking in any engineering understanding as to border on retarded. I
can't wait to get into the rebreather manual and have a few laughs over
that one. 

  He has never seen the real motor compartment seal. He spent big time
trying to reinvent that. He goes to great lenghts to make up some
silliness for the motor cover latches - there are none on the real
scooter. He frets over the silicone on the legs - that works perfectly.
In fact, it works better to penetrate and use silicon than not to, but
that is a moot point - the current scooter has no screws or metal
brackets at all - wrong again. He frets over the motor faring plate - he
copied the wrong one there as well all around in every part. I am amazed
they got any of them to stay together. He could not see what I did to
this one to make it work.

  This arrogant liar goes on to say our scooter is unreliable for "long
rang pentetration". This guy is a laughing stock. What does he know
about any of this - absolutely nothing.

Navigate by Author: [Previous] [Next] [Author Search Index]
Navigate by Subject: [Previous] [Next] [Subject Search Index]

[Send Reply] [Send Message with New Topic]

[Search Selection] [Mailing List Home] [Home]